{"product_id":"panasonic-ew-1513-replacement-battery-36v-680mah-li-ion","title":"Panasonic EW-1513 Replacement Battery 3.6V 680mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePanasonic EW-1513 \/ EW-DJ Series — 3.6V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V 680mAh Li-ion cell for the Panasonic EW-1513, EW-DJ31, EW-DJ66, and EW-DJ26 electric toothbrushes. It replaces the internal battery when the original cell can no longer hold a charge. Swapping this cell restores full brush motor speed and normal charging behaviour on the inductive base.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEW-1513 and EW-DJ series compatibility:\u003c\/strong\u003e\n    These four models share the same 3.6V single-cell architecture, identical connector pinout, and the same physical cell format — 56 × 14 × 14mm. The BMS handshake on each model expects the same voltage window, so one cell covers the group without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through a full charge and discharge cycle on the inductive base. The BMS accepted the cell without error, voltage held steady under motor load, and the charge indicator behaved normally through each stage.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging discipline:\u003c\/strong\u003e\n    Remove the toothbrush from the charging base once full and only return it when the cell is below 30%. The base delivers a continuous trickle charge when the brush sits on it idle — this accelerates capacity fade on a Li-ion cell far faster than regular partial-charge cycling does.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eElectric toothbrush losing brushing power before the battery indicator shows low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells in toothbrushes age unevenly — internal resistance climbs before usable capacity visibly drops. When the brush motor fires, it draws a short current spike. A high-resistance cell sags under that load, dropping voltage enough to reduce motor speed even though the indicator still reads charged. The cell is delivering less current than the motor needs, not less total energy. Replacing the cell with a fresh 3.6V unit eliminates the sag and restores full oscillation speed from the first stroke.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eToothbrush not charging on the inductive base after a new battery is fitted\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eInductive charging on the EW-DJ series is alignment-sensitive — the coil in the brush handle must sit directly over the base coil to couple correctly. If the brush head is not fully pressed down onto the base post, the coils are offset and transfer drops sharply. Check that the handle seats flush with no gap between brush and base. Once correctly seated, the charge indicator should activate within a few seconds and the cell should read above 3.7V after a full charge cycle.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426146549850,"sku":"BWCS-PVL958SL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426146582618,"sku":"BWCS-PVL958SL-2","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426146615386,"sku":"BWCS-PVL958SL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PVL958SL-1.webp?v=1779760330","url":"https:\/\/batteryweb.com\/products\/panasonic-ew-1513-replacement-battery-36v-680mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}