{"product_id":"panasonic-hdc-hs300-replacement-battery-74v-7800mah-li-ion","title":"Panasonic VW-VBG6 HDC-HS300 Replacement Battery 7.4V 7800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePanasonic HDC-HS300 Series — 7.4V Li-ion Replacement Battery (VW-VBG6)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 7800mAh (57.72Wh) Li-ion battery for the Panasonic HDC-HS300 and related HD camcorders including the HDC-TM300, HDC-HS250, and HDC-SD100. It replaces OEM part numbers VW-VBG6, VW-VBG6-K, VW-VBG6PPK, and VW-VBG6GK. Same voltage rail and connector as the factory pack.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHDC-HS\/TM\/SD series compatibility:\u003c\/strong\u003e\n    These camcorders share the same 7.4V battery bay and BMS handshake protocol across the lineup. One pack covers the full range because Panasonic standardised the connector and charge logic across these models.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the HDC-HS300 body. The BMS accepted the pack on first install, reported charge state correctly, and cutoff at the expected low-voltage threshold without forced shutdown events.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install charge cycle on the HDC-HS300:\u003c\/strong\u003e\n    Perform one full charge cycle through the camera body or OEM charger before heavy recording. The HDC-HS300 BMS maps its battery-remaining display to the discharge curve — skipping this step can cause the indicator to read inaccurately for the first several uses.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the HDC-HS300 battery percentage jumps or reads incorrectly after a swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe HDC-HS300 uses a voltage-threshold system to estimate remaining capacity. A new cell has a slightly different discharge curve than an aged OEM pack, so the camera's indicator can misread the state of charge early on. The fix is straightforward: run two or three full charge-to-depletion cycles through the camera body. After that, the BMS recalibrates its thresholds against the new cell's actual curve and the display stabilises.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eHDC-HS300 showing dead battery indicator on a partially charged replacement pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the replacement cell arrives at a storage charge — typically around 3.6–3.8V per cell — and the camera's BMS interprets that as near-empty based on its low-voltage cutoff map. The camera is not rejecting the battery; it is misreading an unfamiliar starting voltage. Charge the pack fully in the OEM charger first, then insert it into the camera body. Once the BMS sees a full 8.2–8.4V at the terminals, the indicator resets and reads correctly from that point forward.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333711855706,"sku":"BWCS-VBG360MX-1","price":53.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333711888474,"sku":"BWCS-VBG360MX-2","price":63.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333711921242,"sku":"BWCS-VBG360MX-3","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-VBG360MX-1.webp?v=1778213032","url":"https:\/\/batteryweb.com\/products\/panasonic-hdc-hs300-replacement-battery-74v-7800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}