{"product_id":"panasonic-hhr-p513a-replacement-battery-24v-1500mah-ni-mh","title":"Panasonic HHR-P513A Cordless Phone Replacement Battery 2.4V 1500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePanasonic HHR-P513A Series — 2.4V Ni-MH Replacement Battery (HHR-P513)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 1500mAh Ni-MH replacement battery for Panasonic cordless phone handsets using the HHR-P513A cell. It fits a wide range of Panasonic cordless models including the KX-TG2258, KX-TG2216SV, and over 44 compatible handsets that share the same battery bay and connector. Voltage and capacity match the original Panasonic specification exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eKX-TG and HHR-P513 platform fit:\u003c\/strong\u003e\n    These handsets share a common 2.4V NiMH cell format, connector orientation, and charge circuit — the base station charges at a fixed slow rate tuned to this cell size, so capacity and voltage must match for the charge cycle to terminate correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the KX-TG charge circuit and confirmed the BMS accepted the charge, terminated at full voltage, and held resting voltage within spec after a 24-hour stand.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge on NiMH cordless handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells in cordless phones need a slow initial charge to reach rated capacity — pulling it early will reduce usable charge for the first several cycles.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNew NiMH cells ship partially discharged and need three to five full charge-and-use cycles before they reach rated capacity. The Panasonic base station uses a slow trickle charge matched to the 1500mAh cell — it does not fast-charge, so each conditioning cycle takes time. Run the handset down until it prompts a low battery warning, return it to the base for a full charge, and repeat. By cycle four or five, talk time will stabilise at the rated capacity.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station charge light not activating on a freshly installed cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells can drop to very low voltage during storage — some Panasonic base stations will not initiate a charge cycle if the incoming cell voltage reads below their acceptance threshold. If the charge indicator stays off after seating the handset, remove and reseat the battery to reset the contact, then leave the handset in the cradle undisturbed for 30 minutes. The base circuit will usually detect the cell on a second attempt once a small surface charge accumulates. If the charge light still does not activate, check that the gold contact tabs on the handset are not bent or recessed below the battery terminal surface.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340086181978,"sku":"BWCS-P513CL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340086214746,"sku":"BWCS-P513CL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340086247514,"sku":"BWCS-P513CL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P513CL-1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/panasonic-hhr-p513a-replacement-battery-24v-1500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}