{"product_id":"panasonic-lumix-dmc-fz50eb-k-replacement-battery-74v-750mah-li-ion","title":"Panasonic CGA-S006 Lumix DMC-FZ50 Replacement Battery 7.4V 750mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePanasonic Lumix DMC-FZ50 Series — 7.4V Li-ion Replacement Battery (CGA-S006)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 750mAh Li-ion replacement cell for the Panasonic Lumix DMC-FZ50EB-K and a wide range of FZ and FZ8 series bridge cameras. It uses the CGA-S006 form factor and fits the same slot as the original Panasonic cell. Voltage and capacity match OEM spec exactly — 7.4V, 750mAh (5.55Wh).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFZ and FZ8 series compatibility:\u003c\/strong\u003e\n    These models share the same battery bay dimensions, contact layout, and 7.4V power rail. The CGA-S006 cell works across the Lumix DMC-FZ30, FZ50EB-K, FZ50EB-S, FZ8EB-K, and over 55 additional Lumix variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the DMC-FZ50 body using both OEM and third-party chargers. The BMS accepted the cell on first install in most cases. Charge current, cutoff voltage, and protection circuit behaviour all matched expected parameters.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle initialisation on FZ series bodies:\u003c\/strong\u003e\n    Some FZ-series bodies map their battery-remaining display to a charge curve logged during the first in-body charge. Run the first full charge cycle inside the camera body — not an external charger — so the BMS can calibrate the fuel gauge to this cell's discharge curve.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the DMC-FZ50 shows a dead battery indicator on a replacement cell that still has charge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe FZ50's battery indicator doesn't read raw voltage — it maps percentage to a stored discharge curve from the last calibration cycle. A new cell with a slightly different internal resistance profile can sit outside that mapped curve, triggering an early low-battery warning or a full stop at what appears to be 30–40% remaining. This isn't a fault with the replacement cell. Running one complete charge-and-discharge cycle inside the camera body allows the BMS to re-map the curve to the new cell. After that cycle, the indicator tracks accurately.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash recycling slows down noticeably mid-shoot\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe built-in flash on the FZ50 draws a sharp current spike to recharge its capacitor between shots. As cell voltage drops toward the lower end of discharge — typically below 7.0V under load — the capacitor takes longer to reach full charge, so recycle time increases. This is normal behaviour tied to available cell voltage, not a faulty battery. If recycle lag appears early in a shoot, check that the cell reached a full charge before use — the FZ50 OEM charger terminates at 8.4V; confirm your charger reaches that voltage before removing the cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333887098970,"sku":"BWCS-PDS006-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333887131738,"sku":"BWCS-PDS006-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333887164506,"sku":"BWCS-PDS006-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PDS006-1.webp?v=1778213591","url":"https:\/\/batteryweb.com\/products\/panasonic-lumix-dmc-fz50eb-k-replacement-battery-74v-750mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}