{"product_id":"panasonic-replacement-battery-36v-700mah-ni-mh","title":"Panasonic BK-T411 Cordless Phone Replacement Battery 3.6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePanasonic BK-T411 — 3.6V Ni-MH Replacement Battery for Cordless Phone Handsets\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 700mAh Ni-MH battery pack built to replace the Panasonic BK-T411 in compatible cordless DECT phone handsets. It matches the original voltage and capacity so the base station charges and communicates with the handset normally. Dimensions are 43 x 31 x 8mm — confirm your existing pack matches before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCordless DECT handset fit:\u003c\/strong\u003e\n    Cordless phone handsets share a tightly controlled voltage window. The base station's charging circuit checks incoming voltage before accepting the pack. This cell matches the original 3.6V rail and NiMH chemistry so the base station completes its charge cycle without rejecting the pack or throwing a fault light.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on NiMH-compatible test equipment. The BMS accepted charge at the expected trickle rate, and terminal voltage held within spec across the full discharge curve without early cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base for a full 16-hour charge before first use. NiMH cells in cordless phones require a slow initial charge to reach rated capacity — skipping this step leaves the pack well below 700mAh on the first few cycles.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or error light after swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH packs lose voltage during storage. If the resting voltage drops low enough, some Panasonic base stations won't start a charge cycle — the charging circuit sees the voltage as out of range and throws an error light instead. This is a storage-discharge issue, not a faulty battery. Place the handset in the base and leave it undisturbed for 30 minutes — most base stations will begin trickle charging once the pack voltage stabilises above the acceptance threshold, typically around 3.0V.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time noticeably shorter than the original battery for the first few uses\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells don't deliver rated capacity straight out of the box. New packs need three to five full charge-and-use cycles before the cells reach 700mAh. If talk time feels short in the first week, that's normal NiMH conditioning behaviour — not a defective pack. Run the handset until it prompts a low-battery warning, return it to the base for a full charge, and repeat for at least three cycles before judging capacity.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339976278106,"sku":"BWCS-ALD935CL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339976310874,"sku":"BWCS-ALD935CL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339976343642,"sku":"BWCS-ALD935CL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ALD935CL-1.webp?v=1778366983","url":"https:\/\/batteryweb.com\/products\/panasonic-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}