{"product_id":"panasonic-wx-h3030-replacement-battery-37v-1050mah-li-ion","title":"Panasonic WX-H3030 Replacement Battery 3.7V 1050mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePanasonic WX-H3030 \/ Attune Series — 3.7V Li-ion Replacement Battery (BX-B3030)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1050mAh Li-ion cell that replaces the OEM BX-B3030 pack in the Panasonic WX-H3030 wireless headset and the Attune 3020 and Attune 3050 systems. It also fits the WX-T3020. The cell dimensions are 53.03 × 35.55 × 7.29mm — same footprint as the original, so the pack drops into the headset housing without modification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWX-H3030, WX-T3020, and Attune platform fit:\u003c\/strong\u003e\n    These models share the same BX-B3030 battery spec — same 3.7V nominal rail, same cell footprint, and the same BMS communication protocol. Swapping between any of them uses this same pack, so there is no separate variant for each headset.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on DECT headset hardware. The BMS completed its handshake with the base station correctly, the protection circuit tripped at the expected low-voltage cutoff, and the cell held within 2% of rated capacity at 1050mAh after conditioning.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle base station conditioning:\u003c\/strong\u003e\n    Seat the headset in the base station and let it run a full charge cycle before taking any calls. DECT base stations log the new cell during this cycle and use that data to calculate the talk-time indicator — skipping this step causes the display to show inaccurate readings for the first several uses.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station not recognising the new pack after install\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen a new Li-ion cell ships, it arrives at storage voltage — typically around 3.6V to 3.7V, not at a full 4.2V. Some DECT base stations interpret this as a fault or an unrecognised pack and show a charging error instead of beginning the charge cycle. This is a BMS initialisation issue, not a defective battery. Place the headset in the cradle and leave it undisturbed for at least 90 minutes — the base station usually clears the error once it detects voltage rising above its recognition threshold, around 3.8V.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eHeadset cuts out mid-call even with a charged indicator\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe WX-H3030 draws current from two loads simultaneously — the audio amplifier and the DECT radio transmitter. That combined spike can cause voltage to dip sharply, triggering the BMS low-voltage cutoff even when the charge indicator still reads partial or full. On a new cell this is most pronounced in the first three to five cycles, before the Li-ion chemistry has settled into its full capacity range. If cutouts stop after several charge cycles, no further action is needed. If they continue past five cycles, check that the headset contacts and base cradle pins are clean — oxidised contacts increase resistance and amplify the voltage sag.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428158734426,"sku":"BWCS-PWH303SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428158767194,"sku":"BWCS-PWH303SL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428158799962,"sku":"BWCS-PWH303SL-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PWH303SL-1.webp?v=1779934278","url":"https:\/\/batteryweb.com\/products\/panasonic-wx-h3030-replacement-battery-37v-1050mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}