{"product_id":"panda-x7-replacement-battery-144v-2600mah-li-ion","title":"Panda X7 Cordless Vacuum Replacement Battery 14.4V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePanda X7 \/ Abir X5, X6, R20 — 14.4V Li-ion 2600mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V Li-ion battery rated at 2600mAh (37.44Wh) for the Panda X7 cordless stick vacuum and compatible Abir models. It slots into the same battery bay and connects to the same BMS handshake as the original cell. Fits the X7, Abir R20, X5, and X6 among others.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eX7 and Abir platform compatibility:\u003c\/strong\u003e\n    The X7, R20, X5, and X6 share the same 14.4V power rail, connector pinout, and BMS communication protocol. One cell fits all of them without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge-discharge cycles on compatible hardware. The BMS responded correctly at both the low-voltage cutoff and the charge termination threshold — no false trips, no thermal events.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging on the X7:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock between uses. Cordless vacuums on continuous dock power develop capacity fade faster than those charged only when the battery is depleted. Charge to full, then remove from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the BMS allows under sustained load — often triggered by a partially blocked filter, not a failing battery. The motor strains against the restriction, current spikes, and the BMS throttles output voltage before the indicator registers a low charge state. Clean or replace the filter first. If suction recovers immediately, the battery was not the cause. If the drop persists on a clean filter, the cell is likely in early capacity fade and the voltage is sagging under load below the motor's operating threshold.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-use and then restarts after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is an overcurrent trip, not a dead battery. When the vacuum runs on heavy carpet or meets a blockage, the motor draws a sharp current surge. If the filter is restricted even slightly, the draw climbs further and the BMS trips the output to protect the cell. Power returns once the BMS resets — usually within 20–30 seconds. Clear the filter and check for a partial blockage at the brush head or intake. If the trip stops occurring after cleaning, the cell is fine. If it continues on a clear airway, confirm the charger is bringing the cell to a full 16.8V before the next use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427997417562,"sku":"BWCS-LTR300VX-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427997450330,"sku":"BWCS-LTR300VX-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427997483098,"sku":"BWCS-LTR300VX-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LTR300VX_1.webp?v=1779933800","url":"https:\/\/batteryweb.com\/products\/panda-x7-replacement-battery-144v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}