{"product_id":"papago-m504-replacement-battery-144v-2600mah-li-ion","title":"PapaGo M504 Cordless Vacuum Compatible Battery 14.4V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePapaGo M504 — 14.4V Li-ion Replacement Battery (INR18650-B4-2600)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V Li-ion replacement battery pack rated at 2600mAh (37.44Wh) for the PapaGo M504 cordless vacuum cleaner. It fits directly into the M504 and restores full vacuum operation when the original cell has degraded. Dimensions are 69.50 x 37.50 x 37.50mm — confirm physical fitment before installing.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eM504 platform fitment:\u003c\/strong\u003e\n    The M504 runs a 14.4V motor rail with a BMS that monitors cell voltage and current draw. This replacement uses the same INR18650 cell format and voltage threshold, so the BMS recognises the pack without recalibration or adapter.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the M504 platform. The BMS held correct cutoff at the low-voltage threshold and did not trip on motor start draw under normal filter conditions.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on the M504:\u003c\/strong\u003e\n    Do not leave the M504 on the charging dock continuously. Cordless vacuums kept on permanent trickle charge develop capacity fade faster than those charged only when depleted. Charge to full, then remove the unit from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the M504\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe M504 motor draws higher current when the filter is partially blocked, because it works harder to pull air through the restriction. Under that elevated draw, the BMS sees cell voltage sag below its threshold and throttles output — even when the indicator still shows charge remaining. The battery is not faulty in this case; the filter is the cause. Clean or replace the filter first, then retest suction at full charge. If suction remains weak after filter cleaning with a fresh cell, check for blockage in the dust path between the nozzle and the bin.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean and then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When sustained suction restriction forces the motor to draw beyond the pack's rated current ceiling, the BMS disconnects output to protect the cells, then resets after the thermal or timing window clears. The motor comes back because the BMS resets — but the root cause is still the restriction. Check the filter and the inlet for blockage before assuming the battery is at fault. If the cutout happens on a clear filter with a known-good battery, verify cell voltage under load — it should hold above 12.0V during normal operation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426404827226,"sku":"BWCS-MDR300VX-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426404859994,"sku":"BWCS-MDR300VX-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426404892762,"sku":"BWCS-MDR300VX-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MDR300VX-1.webp?v=1779933117","url":"https:\/\/batteryweb.com\/products\/papago-m504-replacement-battery-144v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}