{"product_id":"paslode-bid-900-replacement-battery-96v-3000mah-ni-mh","title":"Paslode BID-900 Replacement Battery 9.6V 3000mAh B-9620F2","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePaslode BID-900 \/ BD-90 \/ BD-72 — 9.6V Ni-MH Replacement Battery (B-9620F2)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 9.6V, 3000mAh Ni-MH battery for the Paslode BID-900, BD-90, and BD-72 cordless impact drivers and drill\/drivers. It replaces OEM part numbers B-9620F2, B-967F1, and B-963F2. Capacity comes from the product data: 3000mAh (28.8Wh).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBID-900, BD-90, and BD-72 compatibility:\u003c\/strong\u003e\n    These three Paslode models share the same 9.6V battery platform, connector format, and BMS handshake protocol. One pack fits all three without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through full charge and discharge cycles on a BID-900 unit. The BMS held stable through repeated trigger-pull inrush spikes and did not trip under normal fastening loads.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eNi-MH conditioning on first use:\u003c\/strong\u003e\n    Run the tool through two full discharge-and-charge cycles before using it at maximum torque settings. Ni-MH cells need cycling to reach rated capacity — skipping this leaves noticeable capacity on the table early in the pack's life.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on motor-start inrush during fastening\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eImpact drivers draw a sharp current spike the instant the motor engages — this inrush can be several times the steady running current. On a new or recently stored Ni-MH pack, the BMS may not yet have a current profile for the motor load, so the overcurrent threshold triggers too early. The BID-900's motor is particularly prone to this on hard materials where the clutch engages immediately. Running two light-load cycles first lets the BMS calibrate its threshold to the motor's actual inrush signature.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTool bogs under load mid-fastening cycle\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the driver feels strong on trigger pull but loses torque partway through a drive cycle, the cause is usually voltage sag — the cell voltage drops under sustained load and the tool's controller reduces output to stay above cutoff. On Ni-MH packs, this gets worse if the cells have been repeatedly shallow-cycled and never fully discharged. Check the rail contacts on both the battery and the tool for oxidation or debris; resistance at that junction amplifies sag. Clean the contacts with a dry cloth and run the pack to full discharge before recharging — target a resting voltage of 9.0–9.6V after a full charge cycle.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416078286938,"sku":"BWCS-RTH962PX-1","price":84.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416078319706,"sku":"BWCS-RTH962PX-2","price":98.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416078352474,"sku":"BWCS-RTH962PX-3","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RTH962PX-1.webp?v=1779760143","url":"https:\/\/batteryweb.com\/products\/paslode-bid-900-replacement-battery-96v-3000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}