{"product_id":"peaktech-p-9022-replacement-battery-74v-1600mah-li-ion","title":"Peaktech P 9022 Replacement Battery 7.4V 1600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePeaktech P 9022 — 7.4V Li-ion Replacement Battery (302-11-802)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 1600mAh Li-ion pack replaces OEM part 302-11-802 in the Peaktech P 9022 digital multimeter. It fits a handheld testing instrument used for voltage, current, and resistance measurements in electrical diagnostics and field survey work. Dimensions are 53.00 × 36.70 × 18.50mm — check these against the battery bay before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eP 9022 and related meter models:\u003c\/strong\u003e\n    The P 9022 shares its battery form factor and voltage rail with several Peaktech measurement instruments. All pull from the same 7.4V bus to power the display, input circuitry, and probe interface simultaneously — so the pack must hold voltage under combined load, not just idle draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the P 9022's full input-switching routine and monitored the BMS during probe initialisation. The cell voltage held within spec across measurement mode transitions and the BMS did not trip under the startup current draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use calibration on the P 9022:\u003c\/strong\u003e\n    After fitting this pack, run a full calibration cycle through the instrument menu before field deployment. The P 9022 maps battery state during calibration — skipping this step causes premature low-battery warnings to appear on the first active measurement session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after the P 9022 sat unused in a carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage. If the P 9022 was left unused long enough, the pack voltage can drop below the BMS's minimum recovery threshold — typically around 2.5V per cell — and the protection circuit locks out to prevent damage. The instrument will not power on, and the charger may show no activity at all. To recover, apply a compatible charger and leave it connected for at least 30 minutes without interruption — the BMS needs a sustained trickle input to exit lockout before normal charge current resumes.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eReadings drifting or resetting mid-session on the P 9022\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is not a measurement error — it is a voltage dropout event. Under sustained sensor load, a degraded or partially charged cell briefly sags below the threshold the P 9022 needs to maintain stable input circuitry, causing the display to reset or readings to jump. The issue gets worse during continuous logging sessions where draw is constant rather than intermittent. Charge the pack to full before any extended logging session and check that the cell voltage reads at or above 8.0V before deployment.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360537083994,"sku":"BWCS-PKH922SL-1","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360537116762,"sku":"BWCS-PKH922SL-2","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360537149530,"sku":"BWCS-PKH922SL-3","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PKH922SL-1.webp?v=1778615946","url":"https:\/\/batteryweb.com\/products\/peaktech-p-9022-replacement-battery-74v-1600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}