{"product_id":"pentax-pv-88e-replacement-battery-6v-4200mah-ni-mh","title":"Pentax PV-88E Replacement Battery 6V 4200mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePentax PV-88E \/ PV-100A \/ PV-480 Series — 6V Ni-MH 4200mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 6V, 4200mAh Ni-MH replacement battery for the Pentax PV-88E, PV-100A, PV-480, PV-480E, and over 22 additional compatible models. It fits directly into the camera's original battery compartment and restores full imaging operation. Capacity is 4200mAh (25.2Wh), matching the original specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePV-series platform compatibility:\u003c\/strong\u003e\n    The PV-88E, PV-100A, PV-480, and PV-480E share the same 6V battery architecture, connector orientation, and BMS communication protocol — which is why one cell covers the full range without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the PV-series body. The BMS accepted the cell without fault flags, and voltage held steady across both video and still capture draws.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle on PV-series bodies:\u003c\/strong\u003e\n    Perform one complete charge cycle through the camera body or OEM charger before heavy shooting. The PV-series BMS maps battery-remaining percentage against a discharge curve calibrated during the first cycle — skipping this step causes the indicator to read inaccurately from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDead battery indicator showing on a partially charged replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells have a flatter discharge curve than lithium chemistries. The PV-series battery indicator was calibrated against the original cell's specific voltage-to-capacity curve. A new replacement cell — even at 80% charge — can trigger a low-battery warning because the camera's threshold mapping doesn't align with the new cell until a calibration cycle is complete. Run one full charge to 100% via the camera body or OEM charger, then discharge normally through shooting. After that first full cycle, the indicator stabilises and tracks accurately.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically mid-shoot on the PV-88E\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eErratic percentage readings — jumping from 60% to 20% and back — point to a voltage-threshold mismatch between the new cell's discharge curve and the camera's internal lookup table. This is common on the first few cycles with a replacement Ni-MH cell. It does not mean the battery is faulty. Perform two full charge-discharge cycles through normal shooting and the readings will stabilise as the BMS recalibrates its reference points. After cycle two, verify the resting voltage sits at or above 6.0V before shooting.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333900468314,"sku":"BWCS-NP66-1","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333900501082,"sku":"BWCS-NP66-2","price":58.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333900533850,"sku":"BWCS-NP66-3","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP66_1.webp?v=1778213590","url":"https:\/\/batteryweb.com\/products\/pentax-pv-88e-replacement-battery-6v-4200mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}