{"product_id":"philips-dct-g792-replacement-battery-24v-700mah-ni-mh","title":"Philips DCT G792 Compatible Battery 2.4V 700mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePhilips DCT G792 \/ DCT G612 Series — 2.4V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 700mAh Ni-MH rechargeable battery for Philips DECT cordless phone handsets. It fits the DCT G792, DCT G612, DCT G722, and DCT G725 models. If your handset cuts out mid-call or no longer holds a charge after sitting in the base, this battery is the fix.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDCT G612 \/ G722 \/ G725 compatibility:\u003c\/strong\u003e\n    These four handsets share the same 2.4V two-cell Ni-MH pack format, connector pitch, and physical footprint — 44.60 × 20.91 × 10.47mm. The base station charging circuit communicates via voltage threshold only, so no BMS handshake is required for acceptance.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a DCT G792 base station. The base accepted the battery without error, the charge indicator lit normally, and the handset powered on and registered to the base without issue.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells in storage often arrive partially discharged — skipping the slow first charge means the cells never reach rated capacity, and talk time suffers from cycle one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than expected after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNew Ni-MH cells do not deliver full rated capacity on cycle one. The cells need three to five full charge-and-discharge cycles to reach their rated 700mAh. Each cycle, available capacity increases noticeably. Run the handset until it drops, return it to the base for a full charge, and repeat — by cycle five, talk time should stabilise at full rated capacity.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge light or error after fitting new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003ePhilips DECT bases use a voltage threshold to confirm a valid pack is seated. A battery arriving from storage can sit below that threshold — typically under 2.0V — which causes the base to withhold charging current entirely. Remove the battery and check terminal voltage with a multimeter. If it reads below 1.8V, apply a brief manual trickle charge at 50mA for 10–15 minutes to bring the pack above the base's acceptance floor, then re-seat it in the handset.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339985584218,"sku":"BWCS-AME300CL-1","price":20.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339985616986,"sku":"BWCS-AME300CL-2","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339985649754,"sku":"BWCS-AME300CL-3","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-AME300CL-1.webp?v=1777949695","url":"https:\/\/batteryweb.com\/products\/philips-dct-g792-replacement-battery-24v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}