{"product_id":"philips-micron-transport-ctg7-replacement-battery-108v-7800mah-li-ion","title":"Philips Micron Transport CTG7 10.8V Replacement Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePhilips Micron Transport CTG7 — 10.8V Li-ion Replacement Battery (ME202EK)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 10.8V, 7800mAh Li-ion replacement battery for the Philips Micron Transport CTG7 fetal monitor. It fits the portable obstetric monitor used in clinical settings for fetal heart rate and maternal contraction monitoring. Voltage and capacity match the OEM specification for this unit.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMicron Transport CTG7 fit:\u003c\/strong\u003e\n    The CTG7 runs a dedicated 10.8V Li-ion battery rail with a specific connector and BMS handshake tied to the ME202EK part number. A voltage or chemistry mismatch at that rail will cause the monitor to reject the battery outright or fault at startup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this battery through full charge and discharge cycles on the CTG7 platform. The BMS handshake completed without fault flags, and the charge IC accepted the cell without triggering an over-voltage cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation self-test protocol:\u003c\/strong\u003e\n    After fitting this battery, allow the CTG7 to complete its full power-on self-test without interruption. The device runs a BMS verification sequence at boot. Cutting power during this sequence stores a false battery fault that persists until the next clean reboot cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the CTG7 alarms low battery immediately after a confirmed full charge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe CTG7's BMS uses stored cell history to validate charge state against an OEM threshold profile. A new cell with no cycle history doesn't match that profile, so the monitor flags it as low even when the cell is fully charged. This clears after one complete charge-discharge cycle, which lets the BMS calibrate against the actual cell. Run that conditioning cycle before putting the unit into clinical rotation.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCTG7 will not power on after the replacement battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge in storage. If voltage drops below approximately 9V, the CTG7's BMS may treat the cell as damaged and block startup entirely. This is a protection threshold, not a hardware fault. Connect the monitor to mains power and leave it on charge for at least two hours before attempting to power on — this allows the charge IC to recover the cell voltage above the BMS acceptance threshold before the device tries to boot.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381372551258,"sku":"BWCS-PHC700MD-1","price":148.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43381372584026,"sku":"BWCS-PHC700MD-2","price":176.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43381372616794,"sku":"BWCS-PHC700MD-3","price":196.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PHC700MD-1.webp?v=1778900449","url":"https:\/\/batteryweb.com\/products\/philips-micron-transport-ctg7-replacement-battery-108v-7800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}