{"product_id":"philips-replacement-battery-36v-700mah-ni-mh","title":"Philips SJB2142 Cordless Phone Replacement Battery 3.6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePhilips SJB2142 — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 700mAh Ni-MH replacement battery for Philips cordless phone handsets using the SJB2142 pack. It restores talk and standby function when the original cell has degraded and no longer accepts a charge. The pack measures 46.00 x 31.00 x 10.50mm and fits the original battery compartment without modification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePhilips DECT handset fit:\u003c\/strong\u003e\n    Philips cordless handsets in this range share the SJB2142 footprint and a 3.6V three-cell NiMH configuration. The contact spacing and tab orientation match the OEM tray, so the pack seats and connects correctly without adapter or soldering.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a DECT handset base. The BMS accepted the incoming charge from the base station cradle, and the pack held voltage through full standby simulation without premature cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it on charge for a full 16 hours before first use. NiMH cells shipped in storage state will not reach rated capacity on a short first charge — skipping this step is the most common cause of short talk time complaints on new batteries.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge light after fitting a new NiMH pack\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH batteries can leave the warehouse with a resting voltage below the threshold the base station uses to confirm a valid pack is seated. Some Philips base units will not begin charging if the pack voltage reads too low on first contact. This is not a fault with the base or the battery — it is a voltage floor check. Remove the handset, wait 30 seconds, reseat it firmly, and confirm the charging indicator activates. If it does not, a brief charge from a standalone NiMH charger at 100mA for 10–15 minutes will bring the pack above the 3.2V acceptance threshold.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time noticeably shorter than the original battery for the first few days\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells do not deliver full rated capacity immediately after manufacture or extended storage. Capacity builds over the first three to five full charge-discharge cycles as the cell chemistry stabilises. Pulling the handset off the base for a full talk session and then returning it to charge counts as one conditioning cycle. By cycle five, the pack should be delivering close to the rated 700mAh and talk time should match or exceed the worn original battery.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339870830682,"sku":"BWCS-MTD716CL-1","price":205.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339870863450,"sku":"BWCS-MTD716CL-2","price":245.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339870896218,"sku":"BWCS-MTD716CL-3","price":275.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MTD716CL-1.webp?v=1778366872","url":"https:\/\/batteryweb.com\/products\/philips-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}