{"product_id":"philips-xenium-w8510-replacement-battery-38v-3000mah-li-polymer","title":"Philips Xenium W8510 Replacement Battery 3.8V 3000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePhilips Xenium W8510 — 3.8V Li-Polymer Replacement Battery (AB3300AWMC)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.8V, 3000mAh lithium-polymer cell replaces part number AB3300AWMC in the Philips Xenium W8510 candybar smartphone. It matches the original cell's dimensions (74.73 × 59.78 × 5.50 mm) and slots directly into the existing battery bay. Voltage and capacity align with OEM spec so the phone's charge IC operates within its expected input range.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eXenium W8510 fit:\u003c\/strong\u003e\n    The W8510 uses a single-cell Li-Polymer pack with a 3.8V nominal rail. The AB3300AWMC connector and cell geometry are specific to this chassis — the BMS handshake expects a 3.8V nominal input, and a mismatched cell would push the charge IC outside its regulation window.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the W8510 platform. The BMS accepted the cell without fault codes, held the charge curve through mid-cycle, and the protection circuit tripped correctly at the low-voltage cutoff threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    On first use after installation, disable fast charging and run one complete discharge-to-charge cycle. This gives the fuel gauge IC time to map the new cell's actual discharge curve before the charge IC pushes high current into an uncalibrated cell — mismatched curves cause erratic percentage readings and premature cutoffs.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the Xenium W8510\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff symptom, not a capacity problem. When the modem transmits or the screen peaks brightness, instantaneous current draw spikes. An aged or freshly installed cell with an uncalibrated fuel gauge cannot sustain terminal voltage under that load, so the protection circuit reads a brown-out condition and cuts power. The OS percentage shown at shutdown is meaningless — it reflects the fuel gauge's stale coulomb count, not actual cell state. Run one full discharge cycle from 100% to automatic shutdown and recharge to 100% to let the coulomb counter re-anchor to the new cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eOS showing wrong battery percentage after cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe fuel gauge IC on the W8510 builds a discharge model calibrated to the original cell's internal resistance and voltage curve. A new cell has different impedance characteristics, so the IC's stored model produces inaccurate state-of-charge readings immediately after swap — you may see jumps of 10–20% or a percentage that stalls. One full uninterrupted discharge from 100% down to automatic shutdown, followed by a full charge, forces the coulomb counter to rewrite its reference curve against the new cell. After that cycle, percentage readings stabilise to within a few percent of actual charge state.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404159156314,"sku":"BWCS-PHW851SL-1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404159189082,"sku":"BWCS-PHW851SL-2","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404159221850,"sku":"BWCS-PHW851SL-3","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PHW851SL-1.webp?v=1779369270","url":"https:\/\/batteryweb.com\/products\/philips-xenium-w8510-replacement-battery-38v-3000mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}