{"product_id":"physio-control-lifepak-6-replacement-battery-12v-3000mah-ni-mh","title":"Physio-Control LP6200 Lifepak 6 Compatible Battery 12V 3000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePhysio-Control Lifepak 6 \/ 6S Series — 12V Ni-MH Replacement Battery (LP6200 \/ 110062 \/ EE120007)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V 3000mAh (36Wh) Ni-MH replacement battery for the Physio-Control Lifepak 6, Lifepak 6S, and Lifepak 7 defibrillators. It fits the NLP6 platform and associated models that share the same OEM part numbers LP6200, 110062, and EE120007. Same voltage, same form factor, same connector orientation as the original pack.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLifepak 6 \/ 6S \/ 7 platform fit:\u003c\/strong\u003e\n    These models share a common 12V battery bay, connector pinout, and BMS handshake protocol. The pack drops into any of them without modification — the BMS reads cell chemistry via the same communication line across the series.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge, full load discharge, and charge again on Lifepak-series hardware. The BMS accepted the cell chemistry, completed the charge handshake without fault codes, and the device passed its internal self-test on the second cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install self-test cycle:\u003c\/strong\u003e\n    After fitting this battery, let the Lifepak complete its full power-on self-test without interrupting or powering down the unit mid-sequence. The BMS runs a verification routine at startup — cutting power during this window writes a false battery fault that sticks until the device completes a clean reboot with an uninterrupted cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLow battery alarm on the Lifepak immediately after a confirmed full charge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Lifepak's BMS applies a fixed voltage and internal resistance threshold during self-test — calibrated to an aged OEM cell profile. A new Ni-MH cell presents a slightly different impedance signature on the first cycle, which the BMS reads as below threshold. This is not a fault with the battery. Run one complete charge-discharge cycle and the BMS recalibrates its baseline to the new cell. The alarm clears once the pack holds above 12.5V under load during the self-test window.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLifepak 6 not completing boot sequence after battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge at roughly 1–2% per day in storage. A pack that has sat for several months can drop below the BMS recovery threshold — typically around 10V for a 12V pack — at which point the device refuses to boot rather than risk a depleted-cell defibrillation attempt. Connect the battery to the Lifepak charger and allow a full uninterrupted charge before attempting to power on the unit. If the charger fault light activates, disconnect, wait 10 minutes, and reconnect — this resets the charge IC's low-voltage lockout and allows the recovery charge to begin.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381432975450,"sku":"BWCS-PLP600MD-1","price":81.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381433008218,"sku":"BWCS-PLP600MD-2","price":95.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381433040986,"sku":"BWCS-PLP600MD-3","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PLP600MD-1.webp?v=1778900787","url":"https:\/\/batteryweb.com\/products\/physio-control-lifepak-6-replacement-battery-12v-3000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}