{"product_id":"polmar-navy-015f-replacement-battery-37v-1500mah-li-ion","title":"Polmar NAVY-015F Replacement Battery PB-19 3.7V 1500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePolmar NAVY-015F — 3.7V Li-ion Replacement Battery (PB-19)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1500mAh Li-ion battery built to the PB-19 specification for the Polmar NAVY-015F portable two-way radio. It fits the NAVY-015F directly, restoring transmission and reception capability when the original cell has degraded. Voltage and capacity match the OEM figures — no modification needed.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNAVY-015F platform fit:\u003c\/strong\u003e\n    The NAVY-015F runs a single-cell 3.7V Li-ion architecture. This pack matches that voltage rail and uses the same connector footprint and BMS handshake profile the radio expects on power-up. Swapping to a mismatched cell voltage would cause the radio to under-report signal strength or refuse to key up at full TX power.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through PTT transmit loads on the bench to confirm the BMS handles the current spike cleanly without tripping into protection mode. Charge acceptance through the dock was verified at a rested open-circuit voltage of 3.6V before testing began.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst insertion into the NAVY-015F dock:\u003c\/strong\u003e\n    If the charger shows a fault LED on the first seating, remove the pack, wipe the contact strip with a dry cloth, and reseat firmly. The dock needs a clean contact cycle to read the BMS state before it will begin charging.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the NAVY-015F cuts out mid-transmission on a freshly inserted PB-19\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA new Li-ion cell ships at storage voltage — typically 3.6V to 3.7V, not the 4.1V to 4.2V it holds after a full charge. When you key up and draw transmit current from a storage-voltage cell, the internal impedance causes a voltage dip the BMS reads as a low-cell event. The radio either drops TX power or cuts the transmission entirely. Charge the pack fully before first use — the dock should show green within two to three hours — and the cut-out stops.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBar indicator on NAVY-015F showing one fewer bar than expected after fitting new PB-19\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe NAVY-015F uses a voltage-threshold bar display — each bar maps to a fixed voltage window. A new pack at storage voltage sits at the lower edge of the top threshold, so the radio shows one bar less than full. This is not a capacity fault and the cell is not defective. Seat the pack in the charger, run a complete charge cycle, and the indicator will step up to the correct bar count once resting voltage reaches 4.1V or above.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426342043738,"sku":"BWCS-ICM240TW-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426342076506,"sku":"BWCS-ICM240TW-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426342109274,"sku":"BWCS-ICM240TW-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ICM240TW-1.webp?v=1779930720","url":"https:\/\/batteryweb.com\/products\/polmar-navy-015f-replacement-battery-37v-1500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}