{"product_id":"ppc-z1-replacement-battery-144v-3400mah-li-ion","title":"PPC Z1 Medical Device Replacement Battery 14.4V 3400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePPC Z1 — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 3400mAh Li-ion replacement battery for the PPC Z1 portable medical device. It slots into the Z1's battery bay and delivers the same voltage rail the device's BMS expects. Capacity is 3400mAh (48.96Wh), matching the original cell specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eZ1 platform compatibility:\u003c\/strong\u003e\n    The Z1 runs a 14.4V architecture with a BMS that checks cell chemistry and voltage signature at power-on. This replacement cell matches that voltage rail and Li-ion chemistry so the handshake completes without a fault code.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and load discharge on the Z1 platform. The BMS accepted the cell, completed its verification pass, and held voltage within normal operating range across the discharge curve.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePower-on self-test procedure:\u003c\/strong\u003e\n    After installing this battery, let the Z1 run its full startup self-test without powering it off mid-sequence. The device runs a BMS verification step at boot — interrupting it creates a false battery fault flag that sticks until the next complete reboot cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDevice not completing boot sequence after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Z1's boot sequence includes a BMS handshake that checks cell voltage before the device reaches its main operating screen. A new cell fresh out of packaging may sit at a resting voltage just inside the acceptance window, causing the boot to stall or loop. This is not a faulty battery — it is the charge IC applying a conservative threshold on an unconditioned cell. Charge the battery fully before the first use, confirm the charger shows a complete charge state, then power the device on and allow the full startup sequence to finish without interruption.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharge indicator not reaching 100% on first charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the first charge cycle, the Z1's charge IC applies a conservative current limit to an unconditioned cell and may stop short of displaying a full 100% state of charge. The cell capacity is present — the charge controller is running a cautious first-pass algorithm. Run one complete charge-to-discharge-to-charge cycle and the charge IC recalibrates its end-of-charge threshold. After that first conditioning cycle, the indicator should reach full charge consistently.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381408661594,"sku":"BWCS-SND205MD-1","price":87.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381408694362,"sku":"BWCS-SND205MD-2","price":103.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381408727130,"sku":"BWCS-SND205MD-3","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SND205MD-1.webp?v=1778615901","url":"https:\/\/batteryweb.com\/products\/ppc-z1-replacement-battery-144v-3400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}