{"product_id":"praktica-luxmedia-10-03-replacement-battery-37v-660mah-li-ion","title":"Praktica Luxmedia 10-03 Replacement Battery 3.7V 660mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePraktica Luxmedia 10-03 \/ 12-04 Series — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 660mAh (2.44Wh) lithium-ion cell replaces the original battery in the Praktica Luxmedia 10-03, 12-04, 12-Z4, 12-Z4TS, and compatible compact camera models. It slots into the same battery door and connects to the same contact pins as the factory cell. Voltage and physical dimensions match OEM spec: 40.00 × 31.10 × 5.90mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLuxmedia series compatibility:\u003c\/strong\u003e\n    These Praktica compacts share a common battery bay size and 3.7V power rail across the 10-03, 12-04, and Z4 variants. The BMS in each body reads cell voltage through the same two-contact interface, so one cell fits the full range without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the bench, confirming the BMS accepted the cell and voltage stayed within the 3.7V nominal band throughout draw. No cutoff events triggered under standard camera load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle in the camera body:\u003c\/strong\u003e\n    Run the first full charge through the camera body rather than a third-party external charger. Some Luxmedia BMS configurations only map the battery-remaining display correctly after completing one charge cycle from within the body itself.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash recycling slowing down before the battery indicator drops\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Luxmedia's flash capacitor pulls a sharp recharge current after each shot. As a Li-ion cell ages — or when a replacement cell sits near the lower end of its discharge curve — internal resistance rises enough to slow that capacitor recharge without triggering the low-battery warning. The indicator is tied to resting voltage, not peak current delivery. If flash lag appears while the battery icon still shows partial charge, the cell is likely past its useful capacity window. Swap the cell and retest; lag should disappear in the first ten shots.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the Luxmedia display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003ePraktica's compact camera firmware maps battery percentage using voltage thresholds calibrated to the original cell's discharge curve. A replacement cell with a slightly different discharge profile can cause the indicator to jump — showing 80%, dropping to 40%, then climbing again without any real change in charge state. This is a display mapping issue, not a fault with the cell itself. Complete two full charge-discharge cycles through the camera body; the firmware recalibrates its threshold readings against the new cell's actual voltage behaviour.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333858525274,"sku":"BWCS-LI40B-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333858558042,"sku":"BWCS-LI40B-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333858590810,"sku":"BWCS-LI40B-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LI40B-1.webp?v=1778213291","url":"https:\/\/batteryweb.com\/products\/praktica-luxmedia-10-03-replacement-battery-37v-660mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}