{"product_id":"praktica-luxmedia-14-z4-replacement-battery-37v-660mah-li-ion","title":"Praktica Luxmedia 14-Z4 Compatible Battery 3.7V 660mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePraktica Luxmedia 14-Z4 Series — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 660mAh Li-ion cell replaces the original battery in the Praktica Luxmedia 14-Z4, 14-Z4 petrol, 16-Z51, 14-Z5, and five additional Luxmedia compact camera models. It fits the same form factor as the factory cell at 40.00 × 31.10 × 5.90mm and drops into the existing battery compartment without modification. Capacity follows the product specification at 660mAh (2.44Wh).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLuxmedia compact platform fit:\u003c\/strong\u003e\n    These Luxmedia models share the same thin-profile battery bay, connector orientation, and voltage rail. A single cell format covers the range because Praktica standardised the power input across this compact body generation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the Luxmedia charge and discharge sequence and confirmed the BMS accepted the cell without error flags. Voltage at full charge measured within the expected 4.2V ceiling for Li-ion chemistry.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install charge cycle:\u003c\/strong\u003e\n    Insert the new cell and run one complete charge from within the camera body before your first shoot. Some Luxmedia BMS implementations map the battery-remaining display against a charge curve they build on that first in-body cycle — skipping it causes the indicator to read inaccurately from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash recycling slowing down before the cell reads empty\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Luxmedia flash capacitor draws a burst of current each time it recharges between shots. As cell voltage sags toward the lower end of its discharge curve, that recharge current drops — the capacitor takes longer to reach full charge even though the battery indicator still shows remaining capacity. This happens because the voltage-based fuel gauge reads a state of charge, not available current headroom. If recycling time between flash shots noticeably increases, the cell is near its practical cutoff even if the display disagrees. Swap the battery before the body triggers a forced shutdown mid-shoot.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the Luxmedia display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Luxmedia maps its battery indicator against voltage thresholds calibrated to the discharge curve of the original cell. A new replacement cell — even a correctly specced one — can discharge at a slightly different curve rate, causing the indicator to jump between levels rather than step down smoothly. This is a display mapping issue, not a fault with the cell. Run two or three full charge and discharge cycles through the camera body and the indicator will settle as the BMS refines its threshold mapping. After calibration, expect the display to track consistently at 3.7V nominal.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333874581594,"sku":"BWCS-NP45FU-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333874614362,"sku":"BWCS-NP45FU-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333874647130,"sku":"BWCS-NP45FU-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP45FU-1.webp?v=1778123493","url":"https:\/\/batteryweb.com\/products\/praktica-luxmedia-14-z4-replacement-battery-37v-660mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}