{"product_id":"praktica-luxmedia-6105-replacement-battery-37v-850mah-li-ion","title":"Praktica Luxmedia 6105 Replacement Battery 3.7V 850mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePraktica Luxmedia 6105 \/ 6403 \/ 6503 \/ 7105 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 850mAh (3.15Wh) lithium-ion cell replaces the factory battery in Praktica Luxmedia compact digital cameras. It fits the 6105, 6403, 6503, and 7105 models, along with 34 additional Luxmedia variants. Dimensions are 40.20 × 35.30 × 6.10mm — match these against your original cell before installing.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLuxmedia platform fit:\u003c\/strong\u003e\n    These Luxmedia models share the same battery bay geometry, connector orientation, and 3.7V supply rail. One cell format covers the full range without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on compatible Luxmedia bodies. The BMS held cutoff cleanly at the low-voltage threshold and accepted recharge without manual reset.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install charge cycle:\u003c\/strong\u003e\n    Insert the new cell and run one full charge through the camera body or OEM charger before shooting. Some Luxmedia BMS firmware maps the battery-remaining display to the cell's discharge curve only after completing that first in-camera charge cycle — skipping it causes inaccurate level readings.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash recycling slowing down before the cell reads empty\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Luxmedia flash capacitor draws a concentrated recharge current between shots. At 850mAh, this cell operates within that spec, but as charge drops toward 3.5V the current available for capacitor recharge decreases noticeably. The camera body may still show one or two bars of battery remaining while flash recycle time stretches out. This is the cell approaching its practical discharge floor, not a fault — swap or charge when recycle lag becomes consistent.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the Luxmedia display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Luxmedia indicator maps battery percentage to a fixed voltage-threshold table calibrated for the original cell's discharge curve. A new replacement cell — even at correct capacity — can discharge along a slightly different voltage slope, causing the indicator to skip levels or jump backward. This is a display calibration mismatch, not a cell fault. Run two full charge-discharge cycles through the camera body and the indicator will stabilise as the BMS learns the new cell's curve.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333852954714,"sku":"BWCS-NP40FU-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333852987482,"sku":"BWCS-NP40FU-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333853020250,"sku":"BWCS-NP40FU-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP40FU-1.webp?v=1778213292","url":"https:\/\/batteryweb.com\/products\/praktica-luxmedia-6105-replacement-battery-37v-850mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}