{"product_id":"proam-usa-iris-7-on-camera-monitor-replacement-battery-74v-2000mah-li-ion","title":"ProAm USA Iris 7\" Monitor Compatible Battery 7.4V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eProAm USA Iris 7\" On-Camera Monitor — 7.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 2000mAh Li-ion battery replaces the internal power cell in the ProAm USA Iris 7\" On-Camera Monitor. It fits the Iris monitor used on rigs and field setups where AC power is not available. Voltage and capacity match OEM spec at 7.4V and 14.8Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIris 7\" monitor platform:\u003c\/strong\u003e\n    The Iris draws a consistent low-current load from a 7.4V rail — no motor start surge, no high-draw spikes. The BMS on this cell is calibrated for steady-state LCD and signal-processing draw typical of on-camera monitors, not peak-load tools.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell against the Iris monitor's draw profile on the bench. The BMS held a stable voltage rail throughout discharge and triggered protection cutoff cleanly before the cell dropped below 6.0V — no mid-session brownout.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install charge cycle on the Iris:\u003c\/strong\u003e\n    Connect the monitor to its OEM charger immediately after first install before powering on for a shoot. The Iris battery indicator can misread a new cell's state of charge until the BMS has completed one full supervised charge cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Iris monitor shows a low-battery warning on a freshly charged replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Iris reads state of charge by mapping terminal voltage to a preset discharge curve. A new cell's resting voltage after shipping may sit slightly off the expected starting point, triggering a false low-battery flag. This is not a fault in the cell — it is a calibration mismatch between the monitor's voltage lookup table and the new cell's open-circuit voltage. One full charge cycle via the OEM charger resets the reference point and clears the warning. After that cycle, the indicator tracks accurately through normal discharge.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the Iris display mid-shoot\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the Iris readout skips between percentages — for example, dropping from 60% to 30% in one refresh — the monitor's voltage-to-percentage mapping is not matching the replacement cell's discharge curve. Li-ion cells from different manufacturers have slightly different discharge profiles, which shifts where the voltage thresholds fall against the monitor's indicator steps. This is a display calibration issue, not a capacity fault. Run one complete discharge and full recharge cycle through the OEM charger; most Iris units recalibrate the gauge to the new cell's curve after a single full cycle, stabilising the readout at 4.2V charge termination.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333924487258,"sku":"BWCS-F550-1","price":37.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333924520026,"sku":"BWCS-F550-2","price":41.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333924552794,"sku":"BWCS-F550-3","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-F550-1.webp?v=1778213575","url":"https:\/\/batteryweb.com\/products\/proam-usa-iris-7-on-camera-monitor-replacement-battery-74v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}