{"product_id":"progress-a21p-replacement-battery-18v-2500mah-li-ion","title":"PROGRESS A21P Cordless Vacuum Replacement Battery 18V 2500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePROGRESS A21P \/ A21PL — 18V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 18V Li-ion replacement battery with 2500mAh (45Wh) capacity for the PROGRESS A21P and A21PL cordless stick vacuums. It slots into the same battery bay as the original and connects to the same charging circuit. When the factory cell loses capacity after repeated cycles, this is a direct cell replacement at the same voltage and form factor.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eA21P and A21PL compatibility:\u003c\/strong\u003e\n    Both models run on the same 18V battery platform, share the same connector housing, and use the same BMS communication protocol. One cell replacement covers either unit.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the cell through charge and discharge cycles on a compatible 18V vacuum platform. The BMS accepted the charge handshake without fault codes, and the pack reached rated capacity within two full cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on cordless vacuums:\u003c\/strong\u003e\n    Do not leave the A21P on the charging dock permanently. Continuous trickle charging accelerates cell degradation faster than regular charge-and-remove cycles. Charge to full, then remove the battery or vacuum from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator shows low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the BMS expects — usually caused by a partially blocked filter or brush roll, not a failing battery. The BMS sees a sustained overcurrent condition and throttles power to protect the cell, which the motor experiences as voltage sag. The vacuum loses suction noticeably while the indicator still reads mid-charge. Clean the filter and check the brush roll for hair wrap before assuming the battery is at fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-use then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When airflow is restricted — blocked filter, full dustbin, or obstructed inlet — the motor spins harder to maintain suction and draws a current spike the BMS interprets as a fault. The pack shuts down, cools briefly, and the BMS resets. Clear the blockage, empty the dustbin, and confirm the filter is seated correctly. If cut-outs persist on a clean, unobstructed machine, measure pack voltage under load — a healthy 18V cell should hold above 16V during normal suction.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428008722522,"sku":"BWCS-ELT320VX-1","price":62.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428008755290,"sku":"BWCS-ELT320VX-2","price":73.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428008788058,"sku":"BWCS-ELT320VX-3","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ELT320VX-1.webp?v=1779933824","url":"https:\/\/batteryweb.com\/products\/progress-a21p-replacement-battery-18v-2500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}