{"product_id":"psc-pt40-replacement-battery-37v-900mah-li-ion","title":"PSC PT40 Barcode Scanner Replacement Battery 3.7V 900mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePSC PT40 — 3.7V Li-ion Replacement Battery (633808510046)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V Li-ion cell at 900mAh replaces the factory battery in the PSC PT40 barcode scanner. The PT40 is a handheld scanner used in retail, warehouse, and inventory management environments. Voltage and connector match the original pack — no modifications needed to seat and charge.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePT40 platform fit:\u003c\/strong\u003e\n    The PT40 runs a single-cell 3.7V Li-ion architecture with a fixed BMS handshake at the dock connector. This replacement uses the same voltage rail and contact layout, so the cradle recognises the pack immediately and begins the charge cycle without errors.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through repeated scan-trigger bursts combined with wireless polling loads. The BMS held steady across the inrush spikes and did not trip into protective cutoff under normal operating draw patterns.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation:\u003c\/strong\u003e\n    After installing this pack, seat the scanner in its cradle and run a full charge cycle before the first pick-and-pack shift. Scan trigger inrush is highest when the cell is near minimum voltage — starting a shift on a fully charged cell prevents false BMS trips during the first hour of heavy scanning.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle charging error on a fresh PT40 pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new pack seated in the PT40 cradle can trigger a charging error even when the cell is good. The most common cause is contact resistance at the dock pins — either from oxidation on the cradle contacts or residue on the battery terminals. Wipe both the pack contacts and the cradle pins with a dry cloth, then reseat firmly. If the error clears, the dock is reading the pack correctly and charging will begin.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePT40 dropping wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eDuring fast scan sequences, the PT40 draws current simultaneously for the imager and the wireless radio. This combined inrush can cause a momentary voltage sag on a partially depleted cell, which the scanner's firmware reads as a low-power condition and responds to by dropping the wireless link. The fix is to avoid running the pack below 3.5V during high-frequency scanning shifts. If dropouts are occurring mid-shift, return the scanner to the cradle to top up the cell before continuing.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43325000581210,"sku":"BWCS-WDT220BL-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43325000613978,"sku":"BWCS-WDT220BL-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43325000646746,"sku":"BWCS-WDT220BL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-WDT220BL-1.webp?v=1778123452","url":"https:\/\/batteryweb.com\/products\/psc-pt40-replacement-battery-37v-900mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}