{"product_id":"puppyoo-t10-pro-replacement-battery-252v-2500mah-li-ion","title":"Puppyoo T10 Pro Replacement Battery 25.2V 2500mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePuppyoo T10 Pro — 25.2V Li-ion Replacement Battery (INR18650-25R)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 25.2V, 2500mAh Li-ion battery pack for the Puppyoo T10 Pro cordless stick vacuum. It replaces the original INR18650-25R cell pack when the existing battery no longer holds charge or delivers enough power to run the motor. Capacity matches the factory spec at 63Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eT10 Pro platform fit:\u003c\/strong\u003e\n    The T10 Pro runs a 25.2V motor rail with a BMS that monitors cell voltage and current draw at startup. This pack matches that voltage configuration and connector geometry, so the BMS handshake completes and the vacuum powers on normally.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through repeated charge and discharge sequences, confirming the BMS engages overcurrent protection correctly under simulated high-draw conditions and releases cleanly after the load drops.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging discipline on the T10 Pro:\u003c\/strong\u003e\n    Do not leave the T10 Pro sitting on the charging dock permanently. Continuous trickle charging accelerates capacity fade in this cell format. Charge to full, then remove the vacuum from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the T10 Pro battery indicator reaches low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA partially blocked filter forces the motor to draw more current than rated to maintain airflow. The battery voltage sags under that sustained load, and suction weakens even though the indicator still shows remaining charge. The BMS reads cell voltage, not filter state — it won't warn you. Clean or replace the filter first, then test suction again before concluding the battery is the cause.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eT10 Pro motor cuts out mid-clean, then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When airflow is restricted — by a clogged filter, a blocked brush roll, or a sealed-off inlet — motor current spikes beyond the BMS threshold and the pack shuts the output off as a protection response. The BMS resets once the cell temperature and current settle, which is why the vacuum restarts after a short pause. Clear the blockage, then restart the vacuum; if the cutout stops, the battery is fine and the issue was restriction-driven, not cell failure.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427992535130,"sku":"BWCS-PYT120VX-1","price":92.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427992567898,"sku":"BWCS-PYT120VX-2","price":108.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427992600666,"sku":"BWCS-PYT120VX-3","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PYT120VX-1.webp?v=1779933755","url":"https:\/\/batteryweb.com\/products\/puppyoo-t10-pro-replacement-battery-252v-2500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}