{"product_id":"pyle-pucrcx10-replacement-battery-148v-800mah-li-ion","title":"Pyle PUCRCX10 Cordless Vacuum Replacement Battery 14.8V 800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003ePyle PUCRCX10 — 14.8V Li-ion Replacement Battery (PRTPUCRCXBAT)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.8V 800mAh Li-ion replacement battery for the Pyle PUCRCX10 cordless robotic vacuum cleaner. It matches OEM part number PRTPUCRCXBAT and slots directly into the PUCRCX10's battery bay. Use it when the original cell can no longer hold enough charge to complete a cleaning cycle.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePUCRCX10 fit:\u003c\/strong\u003e\n    The PUCRCX10 runs a 14.8V four-cell Li-ion pack with a proprietary connector and BMS communication line. This replacement matches that voltage rail and connector pin-out, so the vacuum's charge management circuit recognises the cell and allows normal operation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through the PUCRCX10's charge and discharge sequence on the bench. The BMS handshake completed correctly, the charging circuit accepted the cell without fault codes, and the motor draw stayed within the overcurrent threshold throughout.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging discipline for the PUCRCX10:\u003c\/strong\u003e\n    Remove the vacuum from the charging dock once the indicator shows full. The PUCRCX10's dock delivers a continuous trickle current when the robot sits docked indefinitely — this accelerates cell degradation faster than normal discharge cycling does.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the PUCRCX10\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe PUCRCX10 motor draws peak current when it hits carpet resistance or a partial blockage. If the battery cells have degraded, internal resistance rises and terminal voltage sags under that load — even when the indicator still shows a mid-charge state. The vacuum's suction drops because the motor is not receiving the full 14.8V it needs to maintain fan speed. Fitting a fresh cell with low internal resistance restores stable voltage delivery to the motor under load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out and restarting mid-cycle on the PUCRCX10\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. It happens most often when the filter is partially blocked — restricted airflow forces the motor to work harder, current draw spikes, and the BMS cuts power to protect the cells. The vacuum restarts once the BMS resets, usually within a few seconds. Clean or replace the filter first; if the cutouts continue on a new filter, the original battery's cells can no longer handle the motor's start-surge current, and replacement is the fix.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427984736346,"sku":"BWCS-PRC100VX-1","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427984769114,"sku":"BWCS-PRC100VX-2","price":31.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427984801882,"sku":"BWCS-PRC100VX-3","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PRC100VX-1.webp?v=1779933696","url":"https:\/\/batteryweb.com\/products\/pyle-pucrcx10-replacement-battery-148v-800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}