{"product_id":"rca-22925ge2-replacement-battery-36v-1200mah-ni-mh","title":"RCA 22925GE2 Cordless Phone Replacement Battery 3.6V 1200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRCA 22925GE2 \/ 26920 Series — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 1200mAh Ni-MH rechargeable battery for RCA cordless phone handsets. It fits the 22925GE2, 26920, 26920GE1, 26920N, and over 25 additional RCA models that share the same voltage rail and form factor. Dimensions are 50.43 × 42.54 × 14.40mm — verify against your existing pack before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003e26920 and 22925GE2 platform fit:\u003c\/strong\u003e\n    These models share a common 3.6V single-cell NiMH architecture with the same contact orientation and pack dimensions. One battery covers the entire group without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a NiMH-compatible charger and confirmed the cells accept current at the base station voltage without triggering a charge-rejection error. Capacity stabilises after three to five full cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH cordless handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it untouched for a full 16 hours before first use. NiMH cells shipped from storage are partially depleted — a slow initial charge lets the electrodes reach full capacity rather than the reduced figure you see on cycle one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing a charging error on a freshly installed NiMH pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eRCA base stations use a delta-V detection circuit to confirm a NiMH cell is accepting charge. A battery arriving from storage at a very low resting voltage — sometimes under 3.0V — can fall outside the window the base expects, so the station flags an error instead of starting a charge cycle. Remove the handset, hold the Talk key for three seconds to drain residual voltage, then reseat it in the base. Most base stations will retry the charge handshake and begin charging normally once the cell voltage is no longer at the floor.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRange drops noticeably mid-call after a battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH voltage sags under the RF transmit load of a DECT handset — particularly on a new pack that hasn't completed its first conditioning cycles. When voltage drops below the handset's RF power threshold, transmit strength is reduced and range shrinks. The fix is not a hardware fault — run three to five full charge and discharge cycles, and the internal resistance of the cells falls as the electrodes condition. Range returns to normal once the pack is delivering its rated 3.6V consistently under load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340029952090,"sku":"BWCS-P502CL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340029984858,"sku":"BWCS-P502CL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340030017626,"sku":"BWCS-P502CL-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P502CL_1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/rca-22925ge2-replacement-battery-36v-1200mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}