{"product_id":"rca-cc-8251-replacement-battery-74v-2900mah-li-ion","title":"RCA BB-65L Replacement Battery 7.4V 2900mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRCA CC-8251 \/ Pro 598 Series — 7.4V Li-ion Replacement Battery (BB-65L)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 2900mAh Li-ion replacement for the RCA BB-65L battery. It fits the CC-8251, CC8251, Pro 598, Pro 698H, and related RCA camcorder models. Voltage and cell chemistry match the original spec exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCC-8251 and Pro-series compatibility:\u003c\/strong\u003e\n    These RCA camcorder models share the same battery bay dimensions, 7.4V voltage rail, and connector pinout. The BB-65L form factor fits all of them without modification — the BMS in each body reads the same charge state signals from the cell pack.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on a CC-8251 body. The BMS accepted the cell, reported charge state correctly, and the protection circuit tripped at the expected low-voltage cutoff without requiring a manual reset.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle initialisation on RCA camcorder bodies:\u003c\/strong\u003e\n    On first install, charge the battery fully inside the camcorder body using the OEM charger or in-body charging port before recording. Some RCA BMS firmware needs one complete in-body charge cycle to map the new cell's discharge curve and display remaining charge accurately.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery indicator freezing or dropping suddenly on the CC-8251 display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eRCA camcorder bodies use voltage-threshold mapping to estimate remaining charge. A new third-party cell has a slightly different discharge curve than the original, so the body's indicator can lag or jump — especially in the upper and lower 20% of charge. This is a calibration issue, not a cell fault. Run two or three full charge-discharge cycles through the camcorder body and the indicator will track more accurately against the new cell's actual curve.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamcorder cutting power mid-recording on a visually full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis usually means the BMS protection circuit is tripping on a voltage sag during high-draw moments — autofocus motor actuation, optical image stabilisation, and the recording sensor running together create brief current spikes. If the cell voltage dips below the BMS cutoff threshold during one of those spikes, the body shuts down even if average charge looks healthy. Check that the battery contacts on both the cell and the bay are clean and making full contact. If the issue persists after cleaning, confirm the cell is reading at or above 7.2V resting voltage before recording.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333667094618,"sku":"BWCS-SVD250MC-1","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333667127386,"sku":"BWCS-SVD250MC-2","price":38.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333667160154,"sku":"BWCS-SVD250MC-3","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SVD250MC-1.webp?v=1778213032","url":"https:\/\/batteryweb.com\/products\/rca-cc-8251-replacement-battery-74v-2900mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}