{"product_id":"redmi-6-replacement-battery-385v-3250mah-li-polymer","title":"Redmi BM39 Replacement Battery 3.85V 3250mAh Li-Polymer","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRedmi 6 \/ 6 Dual SIM TD-LTE — 3.85V Li-Polymer Replacement Battery (BM39)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.85V, 3250mAh (12.51Wh) Li-Polymer replacement battery for the Redmi 6 and 6 Dual SIM TD-LTE smartphones. It uses OEM part number BM39 and fits the original battery bay without modification. Swap it in when the original cell no longer holds charge through a normal day of calls, messaging, and app use.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRedmi 6 and 6 Dual SIM TD-LTE compatibility:\u003c\/strong\u003e\n    Both variants share the same battery bay geometry, connector pinout, and BMS handshake protocol. One cell fits both. The dual-SIM model draws slightly more standby current from the second radio, but the BMS handles that without adjustment.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the Redmi 6 platform. The BMS accepted the charge IC handshake on the first cycle, and the protection circuit tripped correctly at low-voltage cutoff — no runaway, no false full-charge signals.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle fast charge behaviour:\u003c\/strong\u003e\n    On first use after installation, disable fast charging for one complete discharge-charge cycle. The fuel gauge IC is calibrated to the old cell's discharge curve. Running a slow cycle first lets the coulomb counter recalibrate before high-current charging pushes into an uncalibrated state.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% after installing a new BM39 cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens because the fuel gauge IC still holds the discharge curve of the old, degraded cell. When voltage drops under modem or screen load, the phone hits the hardware low-voltage floor before the OS percentage reaches zero. The phone shuts off even though the gauge still reads 20–30%. One full slow-charge cycle — charge to 100%, drain to auto-shutdown, recharge fully — recalibrates the coulomb counter against the new cell's actual discharge curve. After that cycle, the percentage readout tracks accurately.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePhone feels warm near the battery bay during the first few charges\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA fresh Li-Polymer cell has higher internal impedance than a cell that has been through several cycles. The charge IC pushes the same current into higher resistance, which produces more heat at the cell surface during the first two or three charges. This is normal and reduces as the cell conditions. If the phone stays warm past the fourth charge cycle, check that the back cover is seated flush — trapped air between the cover and battery slows heat dissipation. Surface temperature should stabilise below 40°C by the third cycle.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43392075661402,"sku":"BWCS-MUM600XL-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43392075694170,"sku":"BWCS-MUM600XL-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43392075726938,"sku":"BWCS-MUM600XL-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MUM600XL-1.webp?v=1779143621","url":"https:\/\/batteryweb.com\/products\/redmi-6-replacement-battery-385v-3250mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}