{"product_id":"ricoh-caplio-r8-replacement-battery-37v-1050mah-li-ion","title":"Ricoh DB-70 Caplio R8 Replacement Battery 3.7V 1050mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRicoh Caplio R8 \/ R10 Series — 3.7V Li-ion Replacement Battery (DB-70)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1050mAh Li-ion replacement for the Ricoh DB-70 battery. It fits the Caplio R8, R10, R7, and R6 compact digital cameras. Same voltage, same form factor, same connector as the original cell.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCaplio R-series compatibility:\u003c\/strong\u003e\n    The R6, R7, R8, and R10 all run on the same 3.7V rail and use an identical DB-70 footprint. The battery compartment dimensions — 40.60 × 36.26 × 7.10mm — and the contact layout are unchanged across this generation, so one cell fits all four bodies.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge and discharge cycles on a Caplio-series body. The BMS accepted the cell without fault flags, voltage held stable through the discharge curve, and the camera body reported charge state normally at each threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle conditioning on the Caplio BMS:\u003c\/strong\u003e\n    Charge this cell fully inside the camera body or the OEM charger before your first shoot. The Caplio BMS maps battery-remaining percentage against a stored discharge curve — running one complete charge cycle from inside the body gives it the reference point it needs to display remaining charge accurately.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDead battery indicator on the Caplio R8 with a fresh replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Caplio R8 checks incoming cell voltage against a minimum threshold at power-on. A new cell that has partially self-discharged during storage can read below that threshold, triggering the dead battery icon even though the cell is functional. This is a BMS authentication check, not a faulty battery. Place the cell in the OEM charger first — once it registers above 3.6V, the camera body will accept it and power on normally.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the Caplio display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Caplio R-series maps its fuel gauge to fixed voltage thresholds calibrated against the original DB-70 discharge curve. A replacement cell with a slightly different discharge profile can cause the percentage indicator to jump — skipping from 80% to 40% in a few shots, or stalling at one level then dropping suddenly. This is a calibration mismatch, not a capacity defect. Run two full charge-discharge cycles through the camera body and the indicator will stabilise as the BMS recalibrates to the new cell's actual curve.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333885886554,"sku":"BWCS-BCE10-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333885919322,"sku":"BWCS-BCE10-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333885952090,"sku":"BWCS-BCE10-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BCE10-1.webp?v=1778213540","url":"https:\/\/batteryweb.com\/products\/ricoh-caplio-r8-replacement-battery-37v-1050mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}