{"product_id":"ridgid-r8223400-replacement-battery-12v-4000mah-li-ion","title":"Ridgid 130188001 12V Replacement Battery 4000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRidgid R8223400 \/ R82049 Series — 12V Li-ion Replacement Battery (130188001)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V, 4000mAh Li-ion battery replacing OEM part 130188001 and R86048. It fits the Ridgid R8223400 drill\/driver along with the R82049, AC82049, R82059, and nine additional compatible 12V Ridgid tools. Voltage and cell count match the original pack exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eR8223400 and R82049 platform compatibility:\u003c\/strong\u003e\n    These models share the same 12V battery rail, connector footprint, and BMS handshake protocol. One battery covers the full platform without modification or adapter.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on a Ridgid 12V platform. The BMS held overcurrent protection at the correct threshold during motor-start inrush and did not false-trip under repeated trigger pulls.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eMotor-inrush break-in on first use:\u003c\/strong\u003e\n    Run the drill at half load — no-load spinning or light fastening — for the first two cycles before driving large screws or spade bits at full torque. This lets the BMS record the actual inrush current curve for your specific motor before locking its overcurrent threshold.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS Cutoff on Motor-Start Inrush in 12V Ridgid Drills\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you pull the trigger on a drill, the motor draws a current spike two to four times its running load before the armature starts spinning. On a 12V pack, this inrush can exceed the BMS overcurrent limit if the threshold was calibrated on a discharged or degraded cell. A new pack from storage may also have a tighter BMS window until it completes a full charge-discharge cycle. If the tool cuts out instantly on trigger pull, charge the pack to 100%, then start with no-load trigger pulls before applying torque.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger Blinking Red and Not Accepting the Pack After Storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eRidgid 12V chargers reject packs where cell voltage has dropped below the charger's acceptance floor — typically around 2.5V per cell. A battery stored for several months can self-discharge past this threshold, and the charger blinks red rather than starting a charge cycle. Most Ridgid chargers include a recovery mode: leave the pack seated on the charger for 30 minutes without removing it, and the charger will attempt a low-current trickle to bring cells above the acceptance floor. If the red blink continues after 30 minutes, check that charger output voltage reads at least 12.6V with a multimeter before assuming the pack is failed.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416047943770,"sku":"BWCS-RDD860PH-1","price":73.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416047976538,"sku":"BWCS-RDD860PH-2","price":86.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416048009306,"sku":"BWCS-RDD860PH-3","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RDD860PH-1.webp?v=1779759861","url":"https:\/\/batteryweb.com\/products\/ridgid-r8223400-replacement-battery-12v-4000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}