{"product_id":"ridgid-r840084-replacement-battery-18v-1500mah-li-ion","title":"Ridgid AC840084 18V Replacement Battery 1500mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRidgid R840084 Series — 18V Li-ion Replacement Battery (AC840084)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 18V Li-ion battery rated at 1500mAh (27Wh), built to the same voltage and connector spec as the original AC840084. It fits Ridgid 18V cordless drills, impact drivers, and other tools in the R840084 compatibility group, including models 130383028, 130383001, and 130383025. Slot it into the same port, same orientation — no adapter needed.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eR840084 platform fit:\u003c\/strong\u003e\n    These Ridgid 18V tools share a common slide-rail connector and BMS handshake protocol. The battery's communication pins match the tool's charge-state negotiation, so the fuel gauge and protection circuits talk to each other correctly from the first use.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through trigger-pull cycles on an 18V drill, monitoring the BMS response to motor inrush current. The overcurrent protection held steady across repeated hard starts without nuisance tripping.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBreak-in on Ridgid 18V tools:\u003c\/strong\u003e\n    On first use, run the tool at half load for two cycles before full-torque applications. This lets the BMS log the motor's inrush current signature and calibrate its overcurrent threshold before you hit it with maximum demand.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on drill motor-start inrush surge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you pull the trigger hard on a cold pack, the motor draws a spike of current that can be three to five times the steady running draw. If the BMS hasn't profiled that motor yet, it can read the spike as a fault and cut the output rail. This is more common with smaller-capacity packs like this 1500mAh unit because the cells have less headroom before the BMS protection threshold fires. Running two half-load cycles first trains the BMS and reduces nuisance cutoffs under full torque.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger blinking red after the pack sits unused for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge during storage, and if the pack drops below roughly 2.5V per cell, most Ridgid chargers refuse to enter normal charge mode and signal the fault with a red blink. The charger is not faulty — it's blocking a fast charge into cells at an unsafe low voltage. Some Ridgid chargers include a recovery or \"wake-up\" mode that trickle charges at low current until the pack climbs back above 3.0V per cell, then switches to normal charging. If the red blink persists past 30 minutes of connection, the cells have dropped too low for charger recovery and the pack needs replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416050958426,"sku":"BWCS-RDD840PW-1","price":85.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416050991194,"sku":"BWCS-RDD840PW-2","price":99.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416051023962,"sku":"BWCS-RDD840PW-3","price":110.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RDD840PW-1.webp?v=1779759860","url":"https:\/\/batteryweb.com\/products\/ridgid-r840084-replacement-battery-18v-1500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}