{"product_id":"rikaline-gps-6033-replacement-battery-37v-1000mah-li-ion","title":"Rikaline GPS-6033 Replacement Battery 3.7V 1000mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRikaline GPS-6033 \/ 6030 — 3.7V Li-ion Replacement Battery (300-203712001)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1000mAh Li-ion cell built to replace the original battery in the Rikaline GPS-6033 and GPS-6030 handheld GPS navigators. It matches the OEM part number 300-203712001 and fits the same physical bay. Dimensions are 57.50 × 35.51 × 7.45mm — measure your current cell before ordering if you are unsure.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGPS-6033 and GPS-6030 compatibility:\u003c\/strong\u003e\n    Both models share the same battery bay dimensions, connector pin-out, and 3.7V power rail, so one cell covers either unit without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on GPS navigator hardware, confirmed the protection circuit trips at the correct low-voltage cutoff, and verified the connector seated flush with no voltage drop at the terminal.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eCold-start procedure after fitting:\u003c\/strong\u003e\n    After installing this cell, take the GPS-6033 outdoors and power it on before your first use. The unit performs a full cold start after any complete power interruption — first satellite acquisition can take 5–10 minutes in open sky. Subsequent warm starts are under a minute once the almanac is cached.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eGPS-6033 shutting off without warning at low battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eAfter extended use, the GPS-6033's battery indicator can read one bar and then cut power with no further warning. This happens because the on-screen indicator is calibrated to the discharge curve of the original cell — a replacement cell with a slightly different curve hits the device's voltage cutoff threshold before the indicator reaches empty. The fix is to run the battery through two or three full charge-discharge cycles so the device re-maps the indicator to the new cell's curve. Once calibrated, low-battery warnings appear at around 3.5V as expected.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSaved routes and POIs missing after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSome route data and points of interest on the GPS-6033 are held in battery-backed RAM rather than flash storage. A full power removal — as happens during a battery swap — clears that volatile memory. Before pulling the old battery, export any saved routes to your PC via the Rikaline software utility. After fitting this cell and powering back on, re-import the exported data to restore your waypoints.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377713315930,"sku":"BWCS-GR033SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377713348698,"sku":"BWCS-GR033SL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377713381466,"sku":"BWCS-GR033SL-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-GR033SL-1.webp?v=1778771839","url":"https:\/\/batteryweb.com\/products\/rikaline-gps-6033-replacement-battery-37v-1000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}