{"product_id":"ring-alarm-home-base-pro-station-replacement-battery-74v-2600mah-li-ion","title":"Ring Alarm Home Base Pro 7.4V Replacement Battery 5E42E9","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRing Alarm Home Base Pro Station — 7.4V Li-ion Replacement Battery (5E42E9)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V, 2600mAh Li-ion cell replaces the internal backup battery in the Ring Alarm Home Base Pro Station (Part No 5E42E9). The Home Base Pro is the central hub that manages all wireless sensors and connectivity in a Ring alarm system. When AC power drops, this battery keeps the hub live and the alarm system running.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRing Alarm Home Base Pro compatibility:\u003c\/strong\u003e\n    The Home Base Pro uses a dedicated 7.4V Li-ion cell to sustain its communication processor, Z-Wave radio, and cellular backup module during mains failure. The BMS in this unit negotiates charge state directly with the hub controller — voltage, cell count, and connector orientation must match the OEM spec exactly for the panel to accept the cell.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell against the Home Base Pro's charge circuit and confirmed the BMS handshake completes correctly. The panel accepted the cell, initiated charge, and cleared the low-battery flag within the expected float window.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge after installation:\u003c\/strong\u003e\n    Leave the hub connected to mains power for 24–48 hours after fitting this cell before running any zone or diagnostic test. The Home Base Pro samples battery state continuously, and a partially charged cell will trigger a low-battery alert even if the cell is good.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Home Base Pro reports low battery immediately after fitting a new cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Home Base Pro does not reset its battery flag at the moment of installation. The panel's firmware monitors voltage over time and only clears the low-battery status once the cell has held a stable float charge — typically 24 to 48 hours on mains. Pulling the hub off AC power or running a system test during this window will cause the panel to re-flag the battery as low, because the cell hasn't yet reached the threshold voltage the firmware expects. Keep the hub plugged in and let the charge cycle complete before testing.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eAlarm losing saved programming during a power outage after battery replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the Home Base Pro drops its configuration during an outage, the replacement cell was not yet accepted by the panel's backup circuit. This happens when the battery is installed but not given enough time on float charge to reach full capacity — the panel draws from mains and flags the battery as insufficient for sustaining memory during a transfer. The fix is straightforward: reconnect to mains, allow 48 hours of uninterrupted charging, then simulate an outage by unplugging the hub. If the panel holds its programming through that test, the cell is conditioned and accepted. Target float voltage at the cell terminals is 8.4V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43309824114778,"sku":"BWCS-RAP529SL-1","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43309824147546,"sku":"BWCS-RAP529SL-2","price":53.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43309824180314,"sku":"BWCS-RAP529SL-3","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RAP529SL-1.webp?v=1777868450","url":"https:\/\/batteryweb.com\/products\/ring-alarm-home-base-pro-station-replacement-battery-74v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}