{"product_id":"robomow-rk-4000-pro-replacement-battery-185v-10000mah-li-ion","title":"Robomow RK 4000 Pro 18.5V Replacement Battery 753-11261","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRobomow RK 4000 Pro \/ RK 3000 Pro Series — 18.5V Li-ion Replacement Battery (753-11261)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 18.5V Li-ion battery replaces the original pack in the Robomow RK 4000 Pro, RK 3000 Pro, RK3000, and RK4000 robotic mowers. Capacity is 10000mAh (185Wh), matching the factory spec. It powers the blade motor, drive wheels, and onboard navigation system.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRK 3000 and RK 4000 platform compatibility:\u003c\/strong\u003e\n    Both mower lines run the same 18.5V battery rail and share the same connector pinout and BMS handshake protocol. OEM part numbers 753-11261, 753-11259, 753-11258, 725-17288, and 725-18095 all cross-reference to this physical pack.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through a full charge cycle and simulated blade-start inrush loads. The BMS held the correct cutoff thresholds at both low-draw navigation current and high-draw blade motor startup spikes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-season pre-charge tip:\u003c\/strong\u003e\n    Before the first spring use, bring the battery indoors overnight if temperatures are below 10°C. Cold Li-ion cells carry higher internal resistance, and the blade motor's inrush current on a cold pack can trip the BMS before the mower completes a single row.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on thick-grass and wet-grass blade loads\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the RK 4000 Pro crosses dense or waterlogged grass, blade resistance spikes and the motor draws a short burst of current well above normal operating levels. If the BMS reads that spike as an overcurrent event, it shuts the pack down as a protective measure. This is not a battery fault — it is the protection circuit doing its job. After a 5-minute rest, the BMS resets and the mower resumes. If cutoffs happen repeatedly on a single charge, check that the mowing height is set appropriately for the grass density before re-running the zone.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger rejecting the pack after winter storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA Robomow charger will refuse to start a charge cycle if the battery voltage has dropped below the charger's acceptance threshold — typically around 12V for an 18.5V Li-ion pack. This happens when the mower sat in an unheated garage through winter and the pack self-discharged past that floor. The fix is a recovery charge: use a compatible Li-ion charger with a \"wake\" or \"recovery\" mode, or apply a brief manual boost to bring cell voltage above 12V. Once the pack reads above the acceptance threshold, the standard Robomow charger will take over and complete the cycle normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381288730714,"sku":"BWCS-RRK400VX-1","price":231.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381288763482,"sku":"BWCS-RRK400VX-2","price":275.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381288796250,"sku":"BWCS-RRK400VX-3","price":308.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RRK400VX-1.webp?v=1778899919","url":"https:\/\/batteryweb.com\/products\/robomow-rk-4000-pro-replacement-battery-185v-10000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}