{"product_id":"roborock-a8600rr-replacement-battery-144v-6700mah-li-ion","title":"Roborock A8600RR Compatible Battery 14.4V 6700mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRoborock A8600RR \/ P10 Pro \/ Q5 Pro Series — 14.4V Li-ion Replacement Battery (BRR-2P4S-5200FL)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V Li-ion replacement battery rated at 6700mAh (96.48Wh) for the Roborock A8600RR, P10 Pro, Q5 Pro, and Q5 Pro+ robotic vacuum cleaners. It replaces OEM parts BRR-2P4S-5200FL and BRR-2P4S-5200SL. Fit this battery when the original can no longer hold enough charge to complete a full cleaning cycle or fails to charge entirely.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eA8600RR \/ P10 Pro \/ Q5 Pro platform compatibility:\u003c\/strong\u003e\n    These models share the same 14.4V cell architecture, connector pinout, and BMS communication protocol. The battery pack interfaces directly with the robot's onboard charge management circuit, so the BMS handshake must match — this replacement carries the correct cell configuration to satisfy that handshake without triggering a fault state.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a Q5 Pro unit. The BMS held the cutoff voltage correctly at both the low-discharge and overcharge thresholds. No false low-battery flags appeared during the test runs.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit for this robot:\u003c\/strong\u003e\n    Do not leave the Roborock on its dock continuously between scheduled cleans. These robots trickle-charge when docked indefinitely, which accelerates capacity fade in the cell pack. Charge to full, run a clean cycle, then redock only when needed.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping mid-cycle before the battery indicator reaches low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA partially blocked filter forces the motor to draw more current than its rated load. The BMS reads this as an elevated discharge rate and begins throttling output voltage to protect the cells. The robot interprets the voltage sag as a low-battery condition and reduces motor speed — even though the pack still holds charge. Clear the filter and check the brush roll for tangled debris before assuming the battery is at fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out and then recovers a few seconds later\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a battery failure. When the suction path is restricted — blocked filter, jammed brush, or obstructed inlet — the motor sustains a high-current draw and the BMS opens the circuit to prevent cell damage. The pack resets after a short thermal recovery window, which is why suction returns briefly before cutting again. Fix the restriction first; if cutouts persist on a clear airway, check that the pack voltage at rest reads at or above 14.0V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426403778650,"sku":"BWCS-RKP860VX-1","price":88.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426403811418,"sku":"BWCS-RKP860VX-2","price":104.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426403844186,"sku":"BWCS-RKP860VX-3","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RKP860VX-1.webp?v=1779933118","url":"https:\/\/batteryweb.com\/products\/roborock-a8600rr-replacement-battery-144v-6700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}