{"product_id":"robzone-moppy-20-replacement-battery-144v-2600mah-li-ion","title":"RobZone Moppy 2.0 B6006 Replacement Battery 14.4V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRobZone Moppy 2.0 \/ Moppy 2.0 Profi — 14.4V Li-ion Replacement Battery (B6006)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 2600mAh Li-ion replacement battery for the RobZone Moppy 2.0 and Moppy 2.0 Profi cordless stick vacuums. It matches OEM part numbers B6006 and BTX-B6006. Swap it in when the original cell no longer holds a charge or suction drops off well before the indicator hits low.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMoppy 2.0 and Moppy 2.0 Profi compatibility:\u003c\/strong\u003e\n    Both models run the same 14.4V rail and use the same B6006 connector and BMS handshake — one cell fits both without any modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through repeated load tests against the Moppy 2.0 motor draw. The BMS responded correctly to overcurrent events, cutting and resetting without requiring manual intervention.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on Moppy vacuums:\u003c\/strong\u003e\n    Do not leave the Moppy on the charging dock permanently. Continuous trickle charging accelerates capacity fade on these cells faster than normal cycling. Charge to full, then remove from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the Moppy 2.0 motor works against a restricted airflow — blocked filter, tangled brush roll, or a clog — it draws more current than rated. That extra draw causes voltage to sag under load, which the BMS reads as a low-cell condition even when the pack is not actually depleted. The motor slows, suction falls, and the indicator stays mid-range because resting voltage is still acceptable. Clean the filter and check the brush roll before assuming the battery is at fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean then recovering on its own\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. Sustained restricted suction — usually a blocked filter or a near-full dust cup — forces the motor to pull beyond the BMS current threshold. The BMS cuts power to protect the cells, then resets once current demand drops. It feels intermittent because the trip and reset cycle repeats. Clear the blockage, empty the cup, and confirm the filter is seated correctly; if the cutout stops, the cell is fine.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426476687450,"sku":"BWCS-RBM200VX-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426476720218,"sku":"BWCS-RBM200VX-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426476752986,"sku":"BWCS-RBM200VX-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RBM200VX-1.webp?v=1779933388","url":"https:\/\/batteryweb.com\/products\/robzone-moppy-20-replacement-battery-144v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}