{"product_id":"rockwell-rd2865-replacement-battery-18v-1500mah-li-ion","title":"Rockwell RD2865 18V Replacement Battery RW9351.1 1500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRockwell RD2865 \/ RD2871 Series — 18V Li-ion Replacement Battery (RW9351.1)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is an 18V 1500mAh Li-ion replacement battery for the Rockwell RD2865, RD2871, RD2872, RD2873, and over 30 compatible models in the same platform. It matches the original RW9351.1 part number and slots directly into the same battery bay. Voltage and capacity come from the product specification — 18V, 27Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRD2865 \/ RD2870 platform compatibility:\u003c\/strong\u003e\n    These models share the same 18V rail, battery connector footprint, and BMS handshake protocol — which is why one pack covers the full range. Swapping between compatible models in the lineup carries no risk of communication mismatch.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through repeated trigger-pull cycles on the RD2865 platform and monitored BMS response to motor-start inrush current. The overcurrent threshold held correctly each cycle with no false trips under normal drilling load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst two uses — motor inrush profiling:\u003c\/strong\u003e\n    On first use, run the drill at half load for two cycles before applying full torque. This allows the BMS to log the motor's inrush current draw and calibrate its overcurrent threshold before you push it into demanding applications like hole saws or auger bits.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on the RD2865 during motor-start inrush surge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you pull the trigger hard on a cold pack, the motor draws a short but sharp inrush current — often 3–5× the running draw. A new or storage-rested battery with cells sitting at the lower end of charge can see its BMS interpret that spike as an overcurrent fault and cut output immediately. The tool stops before it ever gets to full speed. Letting the pack reach room temperature and charging it to full — around 20.5V measured at the terminals — reduces inrush-triggered trips significantly.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger not recognising the pack after it sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells that drop below roughly 2.5V per cell during storage fall outside the voltage window most chargers will accept as safe to charge. The charger blinks an error or does nothing — not a charger fault, not a dead pack. Some Rockwell chargers include a recovery or wake mode; place the pack on the charger for 5–10 minutes and check if it transitions to a normal charge cycle. If the pack stabilises above 14V total after that window, it will typically charge through to full.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416046698586,"sku":"BWCS-WRX540PW-1","price":75.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416046731354,"sku":"BWCS-WRX540PW-2","price":88.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416046764122,"sku":"BWCS-WRX540PW-3","price":97.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-WRX540PW-1.webp?v=1779759709","url":"https:\/\/batteryweb.com\/products\/rockwell-rd2865-replacement-battery-18v-1500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}