{"product_id":"roidmi-rm50kc-replacement-battery-259v-2500mah-li-ion","title":"Roidmi RM50KC 25.9V Cordless Vacuum Replacement Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRoidmi RM50KC \/ Z1 Series — 25.9V Li-ion Replacement Battery (INR18650-7S1P)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 25.9V, 2500mAh Li-ion battery pack for the Roidmi RM50KC, Z1, Z1 Air, and RM50D cordless stick vacuums. It slots into the same bay as the factory pack and runs through the same BMS handshake the charger expects. Capacity figure is from the product specification — 64.75Wh total.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRM50KC \/ Z1 \/ Z1 Air \/ RM50D platform fit:\u003c\/strong\u003e\n    These models share a 7S1P 18650 cell configuration on the same 25.9V nominal rail with a matched connector and BMS communication protocol — that is why one pack covers the group.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran charge and discharge cycles on the Z1 platform, confirmed the BMS handshake completed cleanly, and verified the pack reached full cutoff voltage without triggering a fault code on the charger.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on the RM50KC:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock permanently. Cordless stick vacuums on continuous dock charge develop capacity fade faster than units charged only when the pack is depleted. Charge to full, then remove from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe RM50KC motor draws significantly more current when airflow is restricted — a partially blocked filter pushes draw well above rated, and the BMS responds by reducing output voltage to protect the cells. The motor loses speed before the indicator registers a low charge state, so the vacuum feels weak while the display still shows plenty of power. This is voltage sag under load, not a faulty battery. Clean or replace the filter first, then retest — rated suction should return at a stable draw.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean and then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis pattern is a BMS overcurrent trip, not a dead cell. Sustained restricted airflow — a blocked nozzle, full dust bin, or clogged post-motor filter — forces the motor to pull current above the BMS threshold, and the pack shuts output off temporarily to prevent cell damage. Recovery happens once current demand drops. Clear the blockage, empty the bin, and check all filter stages before concluding the battery is at fault. If the trip repeats on an unobstructed machine, measure pack voltage under load — it should hold above 22V at the output contacts.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426436644954,"sku":"BWCS-RDZ500VX-1","price":76.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426436677722,"sku":"BWCS-RDZ500VX-2","price":90.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426436710490,"sku":"BWCS-RDZ500VX-3","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RDZ500VX-1.webp?v=1779933316","url":"https:\/\/batteryweb.com\/products\/roidmi-rm50kc-replacement-battery-259v-2500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}