{"product_id":"rosenbauer-argus-3-replacement-battery-6v-4200mah-ni-mh","title":"Rosenbauer ARGUS 3 DR11AA Replacement Battery 6V 4200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRosenbauer ARGUS 3 — 6V Ni-MH Replacement Battery (DR11AA)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 6V, 4200mAh Ni-MH replacement battery for the Rosenbauer ARGUS 3 thermal imaging camera. It matches the OEM part number DR11AA and fits the ARGUS 3 directly. The ARGUS 3 is a handheld thermal camera used by firefighters for search and reconnaissance operations where battery integrity matters.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eARGUS 3 compatibility:\u003c\/strong\u003e\n    The ARGUS 3 draws current across two simultaneous loads — the thermal detector array and the display backlight. This battery's 6V Ni-MH cell configuration matches the voltage rail the camera's BMS expects. A mismatch triggers low-voltage lockout even on a full charge.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell pack under combined detector and display load. The BMS held voltage within the camera's operating threshold without triggering false low-battery cutoff. Cell balance across the pack stayed within spec through full discharge cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-storage conditioning for thermal cameras:\u003c\/strong\u003e\n    Ni-MH cells stored for more than 60 days develop voltage depression. Before deploying the ARGUS 3 after storage, run two full charge-discharge cycles to restore full cell capacity — partial conditioning leaves the pack short of its rated 4200mAh.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the ARGUS 3 shuts down mid-inspection on a new battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe ARGUS 3 pulls current from two loads simultaneously — the thermal detector's heating element and the LCD display. During peak draw, especially when the camera transitions from standby to active scanning, current spikes briefly. If the battery's internal resistance is elevated — common with Ni-MH cells that haven't been conditioned — the BMS interprets the voltage drop as a depleted pack and cuts power. This is not a camera fault. Run a full charge-discharge cycle before field deployment to reduce internal resistance and prevent nuisance shutdowns.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eThermal image accuracy degrading before the low-battery indicator appears\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe ARGUS 3's thermal detector is voltage-sensitive. As the pack approaches the lower end of its discharge curve — around 5.4V for a 6V Ni-MH pack — detector sensitivity begins to drop before the camera's firmware triggers the low-battery warning. This means temperature readings can drift by several degrees while the battery indicator still shows charge remaining. If readings seem inconsistent during an inspection, check the pack voltage directly. Replace or recharge when pack voltage falls below 5.5V to maintain measurement accuracy.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426126561370,"sku":"BWCS-TPM280SL-1","price":55.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426126594138,"sku":"BWCS-TPM280SL-2","price":65.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426126626906,"sku":"BWCS-TPM280SL-3","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-TPM280SL-1.webp?v=1779930385","url":"https:\/\/batteryweb.com\/products\/rosenbauer-argus-3-replacement-battery-6v-4200mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}