{"product_id":"rowenta-rh8895w09a0-replacement-battery-324v-2500mah-li-ion","title":"Rowenta RS-RH5651 Replacement Battery 32.4V 2500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRowenta RH8895W0 Series — 32.4V Li-ion Replacement Battery (RS-RH5651)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 32.4V, 2500mAh (81Wh) lithium-ion battery for the Rowenta RH8895W0 cordless stick vacuum. It fits the RH8895W0\/9A0, \/9A1, \/9A2, and \/2D0 variants, along with 34 additional models in this line. Use part number RS-RH5651 or YU10562-16003 to confirm fit before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRH8895W0 series compatibility:\u003c\/strong\u003e\n    These models share the same 32.4V battery rail, connector pinout, and BMS handshake protocol. Swapping between variants in this family does not require any reconfiguration — the pack communicates with the vacuum's motor controller the same way the original does.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full charge and discharge on the RH8895W0 platform. The BMS held cutoff voltage correctly at both ends, and the motor controller accepted the pack without throwing a fault state.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on cordless stick vacuums:\u003c\/strong\u003e\n    Do not leave this vacuum on the charging dock continuously. Cordless stick vacuums on permanent dock charge develop capacity fade faster than those charged only when depleted. Charge to full, then remove the vacuum from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the BMS expects under load — typically triggered by a partially blocked filter. The restricted airflow forces the motor to work harder, pulling current higher than rated. The BMS reads that as a voltage sag condition and begins throttling power before the charge indicator reflects the actual remaining capacity. Clean or replace the filter first, then retest suction at full charge.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a flat battery. Sustained high draw — usually from a blocked filter or a carpet pile the motor is fighting against — pushes current past the pack's trip threshold. The BMS disconnects the output to protect the cells, then resets once temperature and load drop. Clear any blockage in the filter or brush head, then resume. If it trips repeatedly on a clean filter, the replacement pack's cells are protecting correctly — check the brush roll for tangled debris increasing drag.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427999547482,"sku":"BWCS-RTH651VX-1","price":104.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427999580250,"sku":"BWCS-RTH651VX-2","price":122.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427999613018,"sku":"BWCS-RTH651VX-3","price":136.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RTH651VX-1.webp?v=1779933755","url":"https:\/\/batteryweb.com\/products\/rowenta-rh8895w09a0-replacement-battery-324v-2500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}