{"product_id":"rowenta-x-force-1460-replacement-battery-324v-2000mah-li-ion","title":"Rowenta X-Force 14.60 32.4V Replacement Battery 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRowenta X-Force 14.60 \/ X-Force Flex 15.60 — 32.4V Li-ion Replacement Battery (GS_20_20_001495)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 32.4V, 2000mAh lithium-ion battery pack for the Rowenta X-Force 14.60 and X-Force Flex 15.60 cordless stick vacuums. It also fits RH9959WO, RH9990WO, and 17 additional Rowenta models sharing the same battery bay and connector. Cross-references include OEM part numbers SS-2230002589, ZR905001, ZR009702, and SS-2230002951.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eX-Force and X-Force Flex platform fit:\u003c\/strong\u003e\n    The 14.60 and 15.60 series share the same 32.4V battery rail and multi-pin connector housing. Both models use an identical BMS handshake, so one cell pack covers both platforms without adapter or modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on an X-Force 14.60 unit. The BMS correctly negotiated charge termination at 32.4V and triggered low-voltage cutoff at the expected threshold with no fault codes raised.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging discipline for X-Force models:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the wall dock between uses. The X-Force charging circuit does not cut trickle current reliably after the pack reaches full charge. Charge to full, then remove the battery or the unit from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the X-Force 14.60\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe X-Force motor draws significantly more current when airflow is restricted — a partially blocked filter can push draw past the BMS overcurrent threshold even with charge remaining in the cells. The BMS reads this spike as a fault condition and reduces output to protect the pack, which the user feels as sudden suction loss. The battery indicator reflects state of charge, not available current, so it can still show two or three bars when the motor is already starved. Clean or replace the HEPA filter first; if suction recovers immediately, the battery is not the cause.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-use then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. On sustained restricted airflow — carpet pile, a blocked nozzle, or a full dust cup — the motor holds a high-draw state long enough for the BMS to interrupt the circuit as a protection measure. The pack cools slightly during the pause, the BMS resets, and the vacuum powers back on. Fix the restriction first: empty the dust cup, clear the nozzle, and check the filter. If the cutout continues on open hard floor with a clean filter, the cells may have degraded below the current threshold the BMS expects at 32.4V full charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426478293082,"sku":"BWCS-RTH990VX-1","price":105.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426478325850,"sku":"BWCS-RTH990VX-2","price":124.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426478358618,"sku":"BWCS-RTH990VX-3","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-RTH990VX-1.webp?v=1779933389","url":"https:\/\/batteryweb.com\/products\/rowenta-x-force-1460-replacement-battery-324v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}