{"product_id":"royal-linea10-replacement-battery-37v-800mah-li-ion","title":"Royal Linea10 PDA Replacement Battery 3.7V 800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eRoyal Linea10 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V 800mAh lithium-ion replacement battery for the Royal Linea10 handheld mobile computer. It fits the Linea10 PDA used in data collection, field operations, and warehouse scanning workflows. Swap it in when the original cell no longer holds enough charge to get through a shift.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLinea10 platform fit:\u003c\/strong\u003e\n    The Linea10 draws from a single-cell 3.7V lithium-ion architecture. This replacement matches that voltage rail and physical form factor, so the device's power management circuit sees what it expects on startup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the bench, confirmed the BMS trips correctly at low voltage, and verified the protection circuit does not flag a fault on initial connection.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eRAM data sync before swap:\u003c\/strong\u003e\n    The Linea10 stores open application state and unsaved records in volatile RAM powered directly by the main battery. Sync all data to the host system before removing the cell — a full power loss clears anything not written to flash storage.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLinea10 not booting after a new battery is installed\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA freshly manufactured lithium-ion cell often ships at a partial state of charge — sometimes below 3.5V. The Linea10's boot sequence draws a short current spike that a low cell cannot sustain, causing the device to stall or display nothing. Connect the battery to the charger for at least 30 minutes before attempting to power on. Once the cell reaches approximately 3.7V, the boot sequence completes normally.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery life noticeably shorter during active scanning sessions\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eStandby current on the Linea10 is low, but active barcode scanning and wireless radio transmission pull significantly more current per cycle. A worn original cell shows this gap first — adequate on idle, dead mid-session. This replacement provides a fresh 800mAh cell, restoring the capacity buffer that active scanning workflows consume. If life still seems short after a full first charge, check whether the wireless radio is set to always-on rather than on-demand.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415943839834,"sku":"BWCS-LE10SL-1","price":26.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43415943872602,"sku":"BWCS-LE10SL-2","price":29.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43415943905370,"sku":"BWCS-LE10SL-3","price":32.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LE10SL_1.webp?v=1779758397","url":"https:\/\/batteryweb.com\/products\/royal-linea10-replacement-battery-37v-800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}