{"product_id":"sagem-colors-memo-replacement-battery-36v-400mah-ni-mh","title":"Sagem Colors Memo Cordless Phone Replacement Battery 3.6V 400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSagem Colors Memo \/ MCP387 Series — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.6V 400mAh Ni-MH battery powers the Sagem Colors Memo, Colors View, 330, and MCP387 cordless handsets, along with six additional compatible models. It matches the original cell format at 49.60 x 33.62 x 6.70mm and slots directly into the handset battery bay. Voltage and capacity are identical to the factory specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eColors Memo and MCP387 platform compatibility:\u003c\/strong\u003e\n    These Sagem handsets share a 3.6V NiMH voltage rail and the same physical cell footprint across the range. One battery pack covers the full cluster because the charging circuit and connector are common across these models.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on NiMH-compatible test equipment. The BMS accepted charge without interruption, and cell voltage held stable across the full discharge curve with no premature cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells in cordless phones need this slow initial charge to reach rated capacity — skipping it compresses the active capacity the cells deliver from the first cycle onward.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than original battery after replacement\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells ship in a partially discharged state and do not hit rated capacity on the first cycle. The Sagem charging circuit tops cells off at roughly 4.2V for the pack, but a fresh cell needs three to five full charge-discharge cycles before the active material in the electrodes is fully conditioned. Run the handset until the low-battery indicator triggers, then return it to base for a full charge — repeat this three to five times. Rated capacity is typically reached by cycle four.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing no charge or error light after fitting a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH packs that have sat in storage can drop below the voltage threshold the Sagem base uses to confirm a valid battery is present. If the base shows an error light or refuses to initiate charging, the pack voltage is likely too low for the base acceptance circuit to recognise it. Remove the handset, hold the power button for five seconds to drain any residual charge, then reseat it firmly in the base. If the base still does not respond, check terminal voltage on the pack — it should read at least 3.0V before the base will accept it.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339881840730,"sku":"BWCS-VDF113CL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339881873498,"sku":"BWCS-VDF113CL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339881906266,"sku":"BWCS-VDF113CL-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-VDF113CL-1.webp?v=1778366873","url":"https:\/\/batteryweb.com\/products\/sagem-colors-memo-replacement-battery-36v-400mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}