{"product_id":"sagem-mc900-replacement-battery-36v-700mah-ni-mh","title":"Sagem MC900 Replacement Battery 3.6V 700mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSagem MC900 \/ MC901 \/ MC902 — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V 700mAh Ni-MH battery for the Sagem MC900, MC901, and MC902 cordless DECT handsets. It replaces the original pack when the handset no longer holds a charge or drops off calls. Dimensions are 46.60 × 31.40 × 10.60mm — verify against your existing battery before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMC900 \/ MC901 \/ MC902 fitment:\u003c\/strong\u003e\n    These three handsets share the same battery bay dimensions, connector orientation, and 3.6V supply rail. One pack covers all three models without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on the MC902 handset. The base station accepted charge on the first cycle, and the BMS held voltage within the handset's operating window throughout the test.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base for a full 16 hours before first use. Ni-MH cells in cordless phone packs ship partially discharged — a slow initial charge lets each cell reach rated capacity. Skipping this step often causes short talk time complaints in the first week.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNew Ni-MH cells rarely deliver full rated capacity out of the box. The cells need three to five full charge-discharge cycles before the electrodes stabilise and capacity reaches 700mAh. Each cycle should be a complete charge in the base followed by normal use until the handset signals low battery. By cycle four or five, talk time should match or exceed the original pack.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge or error light after new pack installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH packs sit in warehouse storage for months and can arrive at 1.0V per cell or lower. Some Sagem base stations reject a pack below roughly 3.0V total because the charger circuit expects a minimum voltage before engaging. Remove the battery, short the contacts with a resistor or a known-good charger to nudge the voltage above the acceptance threshold, then reseat in the base. If the base charges a known-good pack without error, the incoming voltage was the cause.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339999739994,"sku":"BWCS-MC902CL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339999772762,"sku":"BWCS-MC902CL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339999805530,"sku":"BWCS-MC902CL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-MC902CL-1.webp?v=1778367046","url":"https:\/\/batteryweb.com\/products\/sagem-mc900-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}