{"product_id":"sager-np6872-replacement-battery-111v-4400mah-li-ion","title":"Sager NP6872 Replacement Battery 11.1V 4400mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSager NP6872 \/ NP6870 Series — 11.1V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 11.1V, 4400mAh (48.84Wh) Li-ion cell replaces the factory battery in Sager NP6872, NP6870, NP6852, NP6850, and three additional NP-series laptops. It fits the original battery bay without modification and connects to the existing BMS data line. Capacity figures come from the product specification, not estimated values.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNP6850–NP6872 platform compatibility:\u003c\/strong\u003e\n    These models share a common 11.1V three-cell architecture and the same physical connector pinout. The BMS handshake protocol is identical across the range, so one cell works across all listed models without firmware conflict.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge on an NP-series board. The BMS accepted the cell without error, reported state-of-charge correctly after two calibration cycles, and thermal protection triggered at expected thresholds under sustained CPU load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install calibration on Sager NP-series:\u003c\/strong\u003e\n    After installing, run one full discharge to hibernate-cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on this platform.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBIOS reporting poor battery health immediately after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe NP-series BIOS reads EEPROM data written by the original cell and compares it against the new cell's reported values. A fresh cell carries no charge history, so the BIOS flags it as degraded on first boot. This is not a fault with the replacement cell. Run two full discharge-to-hibernate and charge-to-100% cycles. After the second cycle, the BIOS learn routine rewrites the health estimate against actual measured capacity and the warning clears.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLaptop shuts down at 20–30% charge shown on screen\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the fuel gauge IC has not yet calibrated against the new cell's voltage curve. The IC carries the old cell's discharge profile in memory, so it reads the cutoff voltage earlier than the actual chemistry requires. Under combined CPU and display load, voltage sag accelerates the mismatch and triggers a hard shutdown before the percentage reaches zero. Complete one uninterrupted discharge to hibernate and a full charge to 100% — after that cycle the fuel gauge re-maps to the correct 11.1V curve and shutdowns stop.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409602904154,"sku":"BWCS-CLN855NB-1","price":73.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43409602936922,"sku":"BWCS-CLN855NB-2","price":86.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43409602969690,"sku":"BWCS-CLN855NB-3","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CLN855NB-1.webp?v=1779580170","url":"https:\/\/batteryweb.com\/products\/sager-np6872-replacement-battery-111v-4400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}