{"product_id":"salente-l6-replacement-battery-144v-2600mah-li-ion","title":"Salente L6 14.4V Cordless Vacuum Replacement Battery","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSalente L6 \/ G4 — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 2600mAh lithium-ion replacement battery for the Salente L6 and G4 cordless stick vacuums. When the original cell degrades and suction noticeably drops or runtime shortens, this unit restores the vacuum to working condition. It matches the voltage and form factor required by both models.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eL6 and G4 shared platform:\u003c\/strong\u003e\n    Both models run on the same 14.4V rail and use the same battery housing dimensions and connector orientation, which is why a single cell covers both. The BMS in each vacuum communicates with the battery over the same protocol — no firmware mismatch between the two.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the L6's motor controller under restricted-airflow conditions to confirm the BMS handles sustained high-draw events without tripping into a hard cutoff. Voltage held within acceptable range across the discharge curve.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging on the L6 and G4:\u003c\/strong\u003e\n    Do not leave the vacuum seated in the charging dock permanently. Continuous trickle charging is the single fastest way to degrade cell capacity on these models. Charge fully, then remove from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe L6 motor draws significantly more current when airflow is restricted — a partially blocked filter or full dust bin causes the motor to pull past its rated draw. The BMS responds by reducing available current before the fuel gauge registers low, which shows up as weakening suction with bars still lit on the indicator. This is not a fault with the battery itself. Clean the filter and empty the bin, then check whether suction recovers — if it does, the cell is functioning correctly.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When the L6 motor sustains a restricted-airflow draw for long enough, the protection circuit cuts output to prevent cell damage, then resets once temperature and current normalise. The pause before recovery is the BMS re-initialising — typically 15 to 30 seconds. If this happens repeatedly, the filter is the first thing to check; a clogged filter keeps the motor in a high-draw state permanently. Clear the restriction and the trips will stop.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426430943322,"sku":"BWCS-TRQ550VX-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426430976090,"sku":"BWCS-TRQ550VX-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426431008858,"sku":"BWCS-TRQ550VX-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-TRQ550VX-1.webp?v=1779933316","url":"https:\/\/batteryweb.com\/products\/salente-l6-replacement-battery-144v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}