{"product_id":"samba-cleantouch-klarstein-replacement-battery-144v-3500mah-ni-mh","title":"SAMBA CleanTouch Klarstein 14.4V Replacement Battery NS3000D03X3","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSAMBA CleanTouch Klarstein \/ XR210C — 14.4V Ni-MH Replacement Battery (NS3000D03X3)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 3500mAh Ni-MH replacement battery for the Klarstein CleanTouch and XR210C cordless vacuum cleaners. It slots in where the original pack has degraded or failed outright, restoring the vacuum to full operating voltage. Capacity is rated at 3500mAh (50.4Wh) — matching the original specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCleanTouch and XR210C compatibility:\u003c\/strong\u003e\n    Both models run the same 14.4V cell arrangement with an identical connector and BMS handshake profile. One pack covers both — no pin remapping or voltage adjustment needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full discharge and charge sequences on a CleanTouch unit. The BMS responded correctly to the charger handshake, current draw stayed within rated limits, and the protection circuit triggered cleanly at low-cell threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on the CleanTouch:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock permanently. Continuous trickle charge accelerates capacity fade on Ni-MH cells faster than on lithium packs. Charge to full, then remove from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCordless vacuum losing suction before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the battery can sustain at its present state of charge — voltage sags under load even though the indicator reads mid-range. A partially blocked filter compounds the problem: restricted airflow forces the motor to work harder, pulling higher current and triggering the sag earlier. Clean the filter first, then test again. If suction still drops early, the cell pack has lost capacity and needs replacement — a healthy pack holds above 12.8V under full motor load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a motor fault. When suction is restricted — blocked nozzle, clogged filter, or a tight carpet pile — the motor stalls momentarily and current spikes above the BMS threshold. The protection circuit opens, the motor stops, and it resets after the internal timer clears. Check and clear the filter and nozzle before assuming a battery fault. If cut-outs persist on a clear filter, the cell pack can no longer sustain the current the motor demands at 14.4V and replacement is the fix.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428041850970,"sku":"BWCS-KSB002VX-1","price":86.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428041883738,"sku":"BWCS-KSB002VX-2","price":101.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428041916506,"sku":"BWCS-KSB002VX-3","price":112.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-KSB002VX-1.webp?v=1779933966","url":"https:\/\/batteryweb.com\/products\/samba-cleantouch-klarstein-replacement-battery-144v-3500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}