{"product_id":"samba-xr210-replacement-battery-144v-3000mah-ni-mh","title":"SAMBA XR210 14.4V Ni-MH Replacement Battery 3000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSAMBA XR210 — 14.4V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V Ni-MH battery rated at 3000mAh (43.2Wh), built to replace the original pack in the SAMBA XR210 cordless vacuum cleaner. It fits directly into the XR210 and restores the power the motor needs to maintain suction across carpet and hard floors. No OEM part number is listed for this model — match by fit model XR210 before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eXR210 compatibility:\u003c\/strong\u003e\n    The XR210 runs a 14.4V motor rail with a Ni-MH chemistry requirement. Swapping to an incompatible chemistry or voltage causes the BMS to fault or the charger to reject the pack entirely. This battery matches the original voltage and cell chemistry so the charger handshake completes correctly.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through discharge under a sustained motor-equivalent load and monitored BMS cutoff behaviour. Cutoff triggered cleanly at the low-voltage threshold with no false trips during normal draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging on the XR210:\u003c\/strong\u003e\n    Do not leave the XR210 sitting on the charging dock between uses. Ni-MH cells on continuous trickle charge lose capacity significantly faster than cells charged only when depleted. Charge to full, then remove the vacuum from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the XR210\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells show voltage sag under high motor draw before the pack is actually depleted. On the XR210, this appears as weakening suction — especially on carpet — while the indicator still shows charge remaining. A partially blocked filter forces the motor to pull harder, which worsens the sag. Clear the filter first; if sag persists with a clean filter, the cell pack itself has degraded and needs replacing.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eXR210 motor cutting out and then recovering mid-clean\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When suction is restricted — blocked filter, clogged brush roll, or a sealed floor nozzle — the motor draws above its rated current and the BMS shuts the output to protect the cells. Power returns once the BMS resets, typically within a few seconds. Inspect and clear the filter and brush roll; if the motor still trips on an unblocked machine, check that the pack voltage reads at least 14.4V fully charged before suspecting a fault in the vacuum itself.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428047618138,"sku":"BWCS-SBR210VX-1","price":80.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428047650906,"sku":"BWCS-SBR210VX-2","price":93.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428047683674,"sku":"BWCS-SBR210VX-3","price":103.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SBR210VX-1.webp?v=1779933966","url":"https:\/\/batteryweb.com\/products\/samba-xr210-replacement-battery-144v-3000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}