{"product_id":"samsung-digimax-i6-pmp-replacement-battery-37v-820mah-li-ion","title":"Samsung Digimax i6 SLB-0837 Replacement Battery 3.7V 820mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eSamsung Digimax i6 PMP \/ L50 \/ L60 \/ L70 — 3.7V Li-ion Replacement Battery (SLB-0837)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 820mAh Li-ion replacement cell for the Samsung Digimax i6 PMP and related Digimax compact camera bodies. It matches the OEM SLB-0837 and SB-L0837 part numbers and fits the slim 40.12 × 35.80 × 6.20mm battery bay. The 3.03Wh energy rating is identical to the original specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDigimax L-series and i6 PMP shared platform:\u003c\/strong\u003e\n    The Digimax i6, L50, L60, L70, and related bodies use the same SLB-0837 footprint and voltage rail. The connector orientation, cell dimensions, and BMS communication protocol are consistent across the range, so one cell services the entire group.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the Digimax body charger circuit and monitored the BMS handshake on first insertion. The protection circuit engaged correctly at low-voltage cutoff and accepted the charge signal without error flags on the camera display.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use charge cycle in the camera body:\u003c\/strong\u003e\n    Insert the new cell and run one full charge cycle through the OEM charger or camera body before shooting. Some Digimax BMS builds only map the battery-remaining indicator accurately after the first in-body charge cycle completes — skipping this step causes the indicator to read erratically from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash recycling lag on a new SLB-0837 cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Digimax flash capacitor draws a sharp recharge current spike between shots. A new cell that has not completed its first full charge cycle may show a measurable voltage sag during that spike, causing the camera to delay the ready indicator by a half-second or more. This is not a fault in the cell — it is a break-in behaviour. After two or three full charge and discharge cycles, internal resistance stabilises and recycling lag disappears.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the Digimax display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Digimax indicator maps battery percentage to a voltage-threshold table calibrated on the OEM cell's discharge curve. A replacement cell discharged from full for the first time may not match that curve exactly, so the indicator can jump — say, from 80% to 40% — without a corresponding drop in actual capacity. Run the cell down to cutoff once and recharge fully inside the camera body. The BMS re-maps the thresholds on that first full cycle, and the display stabilises to 3.7V nominal from that point forward.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333872025690,"sku":"BWCS-SBL0837-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333872058458,"sku":"BWCS-SBL0837-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333872091226,"sku":"BWCS-SBL0837-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SBL0837-1.webp?v=1778213403","url":"https:\/\/batteryweb.com\/products\/samsung-digimax-i6-pmp-replacement-battery-37v-820mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}